(800) 853-2651
SHOP NOW

Recent content by Thomas Cooke

Yesterday's Tractor Forums
  1. T

    Farmall Super C Top link, mount location move

    There's a cross bar mounted to the box and also down to the deck.
  2. T

    Farmall Super C Top link, mount location move

    I'm currently using those holes for the floor extension angle iron pieces, but i suppose i could upgrade the bolts to 8's and get longer ones. Do you think that 1/2"x 3" flat bar would be strong enough? and would that clear the PTO Shaft area safely? Thanks, Tom my pictures are in the photo...
  3. T

    Farmall Super C Top link, mount location move

    The only issue i had with mounting a cab on my Super c for winter work is the location of the top link for my three point hitch that bolts up inside the tool box/seat pedestal. It needs to lower down almost 9 inches below the floor platform so my steel bi-fold door can be mounted on the back...
  4. T

    Farmall Super C Top link, mount location move

    I Tried to post pictures but they won't work, you might find some on my facebook page or Classic tractor fever facebook page. I'll try to see if that idea will work for me. https://www.facebook.com/rockhillfarm.lubecmaine https://www.facebook.com/ClassicTractorFever/posts/1511837802197702
  5. T

    Farmall Super C Top link, mount location move

    The only issue i had with mounting a cab on my Super c for winter work is the location of the top link for my three point hitch that bolts up inside the tool box/seat pedestal. It needs to lower down almost 9 inches below the floor platform so my steel bi-fold door can be mounted on the back...
  6. T

    ARPS Half Track Repair

    Well i had two breaks in the half tracks within 20 minutes because of the worn out brackets letting the chain loops drop out and i went ahead and welded the loops in place on one side to hold them together for the winter. I An worried that the loops may not be able to pivot fully so i only...
  7. T

    ARPS Half Track Repair

    Thanks all, I'll save this project for the spring. It's snowing 6 inches the next two days and hopefully it will hold up long enough for me to play with my toy...lol. I'll get some mild steel and start getting the little plates cut to length and bent to shape inside my shop. There's no way i...
  8. T

    ARPS Half Track Repair

    I Just think it would be easier to weld strips over everything rather than cutting off the rivets and making steel strips then hot riveting or bolting it all back. THanks
  9. T

    ARPS Half Track Repair

    I'm Curious if there are any ARPS Half tracks folks out there with repair experience? The ring retainer tabs that you bend down to secure the steel loops are getting weak and as i use the tracks to plow snow every once in a while a loop ring will push the retainer out and the ring will drop out...
  10. T

    '53 Super c Hydraulics problem

    I Removed the big screen in the touch control and it had a rip in the screen so i cleaned it real good and found some brass screen with the same size openings in the mesh and flux soldered a patch and reinstalled the screen. so i'm thinking because of the hole in the filter my system must have...
  11. T

    '53 Super c Hydraulics problem

    It can't be the pump because the loader still works fine. It runs off the same valve block next to the starter and the same pump. If it stops raining a little today i'll try to crack loose the supply/return line to the top of the lift ram to see if there is air trapped in there.
  12. T

    '53 Super c Hydraulics problem

    My Three point lift has stopped working all of a sudden like and i can't figure out what it could be. I Have a Paulson loader on front and it works fine, but the Cultivator lifts and the rear lift ram stopped completely. It has plenty of oil in it and before it stopped it was making a screeching...
  13. T

    IH Industrial tractor model 3444

    Well i geuss till i can find some parts and pieces i could just use it for a loader. I Can't go too wrong with the low $700 price. Thanks
  14. T

    IH Industrial tractor model 3444

    Yea i heard it was very similar to the 3414. I Need a bucket tractor to load and move/turn soil and mulch that i mix. But i need the Live PTO and 3 pt hitch to run a bush hog and 6 foot tiller. How much trouble would it be to install that drive spline/shaft in the rear case, and rig a 3pt onto...
  15. T

    IH Industrial tractor model 3444

    I"m thinking of buying a model 3444 IH Industrial model tractor that was set up originally with a bucket and a backhoe. During it"s lifetime somebody did away with the backhoe and filled the large hydraulic tank with concrete for use as a counterweight. It has no Rear PTO drive shaft or 3 pt...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top