(800) 853-2651
SHOP NOW

Recent content by Tim Yates

  1. T

    301 offset grind

    There is no grinding to the block or cam as Bob said but when you grind the crank make sure to narrow up the journals or you can build the rods up slightly on the big end and mill them down to the proper width. The 153 Rod is slightly narrower than the 301 rods
  2. T

    moline m5 heads and jugs

    Look for a spacer or multiple gaskets between the jugs and crank case. The M5 jugs are slightly shorter than the U jugs. Internal pats can be changed to eliminate this though. As stated below heads are interchangeable between all of the tractors for the most part. With head studs and push rods...
  3. T

    16.9 x 38 Tires needed

    I will be coming to central Ky on June 22 for a week of mission work. I could possibly bring them with me.
  4. T

    Gary Hearn Richmond Va

    Yes it"s my number, I know he had been looking for a tractor some years back and I may have what he was looking for. I"m in Virginia. Thanks
  5. T

    16.9 x 38 Tires needed

    The F&R that are new are $1200 without rims they are 6 ply The SAT top cuts with rims they are 8 ply. $1500. W/out rims $1100
  6. T

    The Next HOOK

    What. Color orange? Lol.
  7. T

    16.9 x 38 Tires needed

    I have a set of 16.9x38 traction F&R 151 at 99.9% and a set of SAT top cut. With or without rims for either set. (540)312-6643. Near Roanoke Va
  8. T

    Gary Hearn Richmond Va

    Saw an old post Gary had one hear a good while back. Would like to talk to him. If anyone knows him could someone contact me Thanks Tim. (540)312-six six 43
  9. T

    JD M standard Value

    I think the radiator cap adds character. Lol. The $2500 range is what I was thinking. Thanks
  10. T

    JD M standard Value

    I have a lady interested in selling a 1950 JD M standard. It has new rear tires, nice straight sheetmetal. 12 volt. Carb just rebuilt and tank cleaned. Has cultivators , plow, disc, sickle mower, etc. has front wheel weights. Very nice tractor and runs great. What you think it's worth and would...
  11. T

    Farmall head

    A good one. It's the high compression gas head.
  12. T

    Resleeved big bore blocks/ pistons

    Use HD800 blocks. Can bore to 5.5" and still run water. Expect $1200 for a set of 4 with rings and pins.
  13. T

    Good morning from Powhatan Va

    Over 200 hooks on Sunday. Almost 400 hooks for the weekend. Not bad for a club pull! Great weekend and festival.
  14. T

    Good morning from Powhatan Va

    This dirt will definitely test your horse power. The track was hooking great. Do it again today. Pull starts at 12 pm
  15. T

    Tire cutting

    Call Flynn Tire cutting, he may have a way to get tires hauled with various people coming from different locations . Brian Flynn (765)810-4762
See more
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top