(800) 853-2651
SHOP NOW

Recent content by timberbeast

Yesterday's Tractor Forums
  1. T

    nh 66

    I am in need of a good needle for my nh 66. Mine broke in 3 pieces brought it home and welded it with nickel rod to finish. If someone has one oround they want to part with e mail me.
  2. T

    M hydraulic capacity

    Thanks thats what I figured.
  3. T

    M hydraulic capacity

    I bought a M last fall with a stuck motor. I got her freed up. Its got live hydraulics and a Douall loader. Im not sure where the level should be. It is plumbed from the loader frame to the belly pump then to the live pump. My question is should it be in the loader tube?
  4. T

    Oliver 77 cyl sleeve O-ring

    Call Korves Oliver they will have what you need.
  5. T

    77 Governor

    My governor is surging when under load like when baling. Took it apart, back of gear is worn badly(on engine block side). No thrust washer. I think it has updated bushing, it has a ridge. I cannot adjust linkage, is adjusted all the way in.
  6. T

    77 Governor

    Will a governor from a 60 fit a 77. I need anew one and there is 2 for 60s on ebay.
  7. T

    NH 66

    I broke a needle on mw 66 yesterday. It was in 3 pieces had about 20 bales left to finish .So I welded it with some nickel rod and crossed my fingers and it worked.I was wondering if I should get another one or keep my fingers crossed?
  8. T

    77 Hydraulic Pump

    Can anybody help me? I need a hydraulic pump for a 1950 77. It doesn"t have one. It has a lift. What are my options? Thanks.
  9. T

    77 starter

    My tractor barely turned like the battery was dead. Checked, battery was good. After some investigation, I discovered the starter drive is stuck in the out position. Has anyone heard of this? Thanks.
  10. T

    77 sleeve O rings

    Does anyone have an idea where I can get O rings for the sleeves on my 77. Called Yesterdays Tractor they dont have just O rings. I was thinking maybe fastenal, any ideas would be appreciated.
  11. T

    77 stuck engine

    I have a 77 with a stuck engine. Pulled the head off, soaking pistons. Turned the crank with a bar and the sleeves are moving inside the block. Once I get pistons loose, do I have to re-seal the sleeves? Pistons are moving a little, will let them soak a little more.
  12. T

    Oliver 77 info

    Just brought home my winter project today! A 77. I knew the motor was stuck when purchased, but took plugs out and found antifreeze in cylinders. Hopefully just head gasket, not cracked heaqd or block. Any info would be much appreciated!
  13. T

    nh 66 baler

    thanks for the info! great help and appreciated much!! working in the heat is something i did for long time, logger for 20 years, setting chokers and running power saw in the sun. Know all about heat stroke. No more trees, had to start farming. Have a great fourth and thanks again!
  14. T

    nh 66 baler

    I bought a nh66 bailer last spring. I am curious what hardness shear bolt to use... Grade 5 or softer? Cant find anybody to bail my hay so I decided yo do it myself. Anytips on this bailer would be greatly appreciated. I plan on haying if it ever stops raining here in northern MN
  15. T

    Can I use a square baler?

    Thanks for all the info, I just want to bale a couple acres for my steers and I think I"ll go with the N.
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top