Recent content by tinmanlocal2

  1. T

    1750 with loader

    email is [email protected] Phone number is 660-473-0647
  2. T

    1750 with loader

    I switched the hoses today and the problem stays with that particular valve. Is it a check valve problem or bad o-rings?
  3. T

    1750 with loader

    I had planned on switching the hoses around to see if it was truly in the valve. I have an I&T manual. I studied it a bit last night. Seems like there are a couple O-rings on the spool. Anything else I should look at while in there? It's gotten so cold here in the last couple days, I'm not too...
  4. T

    1750 with loader

    Once I open it up what should I be looking for? Is it pretty obvious what will need to be replaced?
  5. T

    1750 with loader

    I have a 1750 with loader plumbed into the remote hydraulics. The bucket cylinders bleed down a bit. I've rebuilt the cylinders. My fear is the remote valve is leaking by. Is this difficult to repair? Possibly just some o-rings or something more? Thanks, Darin
  6. T

    Oliver 1750 power beyond plumbing

    Is that some sort of restrictor on the return line or can that be plumbed straight back into the system?
  7. T

    Power Beyond on a White 2-70

    This message is a reply to an archived post by Bill in Eastern WA on April 13, 2013 at 20:40:33. The original subject was "Power Beyond on a White 270". Is that some sort of a restrictor on the return line or can that just be plumbed straight back into the system?
  8. T

    Oliver 1750 power beyond plumbing

    I think this helps. I'll check it out if it warms up a bit in the next day or so. Thanks, Darin
  9. T

    Oliver 1750 power beyond plumbing

    I know this topic has been beat to death, but I"m having trouble with any results for a diagram for power beyond plumbing for my 1750. My loader is plumbed through the remotes now, but I hear it"s better to go through the power beyond ports. My question is where do I hook up to? Does anyone have...
  10. T

    White 2-150 radiator

    You might check with Welter's Farm Supply in Verona, MO. They"ve probably got a good used one or might know of a source for new. 1-471-498-6496.
  11. T

    1850 carb USX-37

    I would check with Mark's Carb in MN. He has a good quality kit. Better needle and seat than some of the import kits. The kit I recently got did not come with a float, but I'm sure he has them.
  12. T

    1750 Hydra-power

    Does anyone know the capacity for the hydra-power on a 1750 gas? It's the two speed version. My book says one quart but I know that can't be right.
  13. T

    Oliver 1750 Light switch service bulletin

    Darin Stoll 29597 Salem Rd. Smithton, Mo. 65350
  14. T

    Oliver 1750 Light switch service bulletin

    So terminal "R" doesn't get anything connected? That gives me... First position-All four front lights and rear flood. Second position-All four front lights. Not sure on third position, because I don't have a tail light. Does this sound correct? First two positions give me panel lights as well.
  15. T

    Oliver 1750 Light switch service bulletin

    Thank you. Look forward to your response.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top