Recent content by Tom B (tbone)

  1. T

    D4 serial number

    The Caterpillar D4C crawler tractor was introduced in 1959 in the USA. Production began in France a year later. Standard tractors were manufactured in the USA only, with a 39A and 54A serial number prefix. LGP tractors were manufactured in the USA, with a 24A and 40A prefix, and in France, with...
  2. T

    Excavator roller bearing housing repair

    Wow, that sounds like just what I am looking for. I hope others can see this and learn like I did. I had no idea that stuff existed. You all are great! Tom
  3. T

    Excavator roller bearing housing repair

    Hi, I am working on my old Hein-Werner C14A excavator and I have run into a problem with the rollers. The old bearings were worn into nothing and the housing that seats the bearing is too big by about 1/16" I have new bearings and I wanted to know if something like Devcon 10110 could be used to...
  4. T

    payloader fan direction

    Thanks guys for all the ideas! Tom
  5. T

    Service chart for 372, 406, 450 and 501 carburated engines

    This is a chart that I came across a few years back, thought I would post it. It has some good information. The 372 is in my Hough loader. High resolution photo of chart
  6. T

    how much to fill a funk pump drive on excavator

    Hi, I am trying to figure out how much gear oil to put in a funk pump drive on my excavator. It is a triple drive, one on top, two on bottom. There are 4 plugs, two on the top one and two for the bottom two. When you put oil in the top hole, it flows down to the bottom drives. So, do you fill it...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top