Recent content by Tom-TX

  1. T

    OT:Kids today (parents) rant

    And, you dont know how to unplug a video game at 1:00 AM? And, you cant lay down the law of YOUR household about hogging multiple bags of snacks? To a 10 year old? And, you get on here and rant? Better look in the mirror at a person who missed a golden oportunity to teach a small lifes lesson...
  2. T

    Battery Water

    No need for any confusion, just go to Wally World and get a 99 cent jug of distilled water and use it in you batteries. What is confusing about that? Tom
  3. T

    cav pump

    Sam, I am copying a long post from my files about replacing the o-rings around the throttle shaft and cut-off shaft, as well as the top gasket. You should replace all these as they will leak sooner or later. My advice is clean, clean, clean and write down and/or photo ALL springs/connections...
  4. T

    MF35 Battery issue

    No such thing as "too powerful" battery as long as tractor is 12V and battery is 12V. The tractor will only draw the amps it needs from the battery, regardless of how high the battery capacity is. Now is he put a 12V battery on your 6V tractor then there is your trouble. Now if he hooked up...
  5. T

    Battery Charging Questions

    I have an electric fence around 2 sides of my hay field, and have 2 12V batteries, whick I put one on the fnece charger, take the other to barn and charge it. One battery is Kirkland (Costco brand) and is a "marine starting and deep cycle conbination battery" the other is a Stowaway brand and...
  6. T

    MF698 Help! Lots of Problems

    I have a MF-690, which is very close to your 698, and may have identical brakes. My brakes were both locking on, and would not release. Rebuilt the slave cylinder on each, and rebuilt the 2 master cylinders. Both the slaves and masters are very simple, straight forward. BUT, the key is bleed...
  7. T

    F 150 Battrery

    Stan, it might go dead tonight, might last another 6 years. No one knows. More info might enable a little better guess. Giving you trouble? Had it load tested? Inspected posts, cleaned, good connections? Charging system up to par? Hard to tell. Tom
  8. T

    6013

    Hey Stick Welder, did you READ my post? Read it again. I clearly said "one difference" and did not in any way say there wasnt a lot of other differences. Why jump on someone, when you did not read the post? Have a good day. Tom
  9. T

    6013

    One difference is the 6011 is deep penetration, the 6013 is shallow penetration. Go to Lincoln website and look up specs. Tom
  10. T

    Paying Hay Help

    I have to pay 8 dollars hour, I furnish water and lunch. Sometimes have to give 10 dollars hour. Tom
  11. T

    what the heck is this ????????

    Looks like an artillary shell to me. Tom
  12. T

    OT- tough beef???

    Was it the same butcher you usually use? Soungs like the ole butcher switch game. This is where they can make easy money. Ever wonder whey the butcher shop has all those choice steak cuts for sale all the time, and has very little ground sutff, lower quality roasts, etc? Because they are taking...
  13. T

    How much to bale hay

    Prices here in North Central Texas to cut, rake, bale in 4 X 5 rounds runs from 20 to 22.50 per bale, leaving bales in the field. Tom
  14. T

    massy #9 baler

    As they say in real estate, location, location, location?? If close to me, I would love to get it. Tom
  15. T

    2-4-D

    I used Grazon P + D and there was no grazing restrictions, except for lactating dairy cows. The Grazon P + D contains another chemical plus 2-4-D, and is the widely used one around here. Tom
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top