Recent content by TOM1949

  1. T

    MH Pony axle housing seal

    Hi. I was able to locate the seal that goes into the adjuster "nut" and the carrier bearings. So far no luck on the O ring that seems to seal the nut. That part is confusing. Not sure where it goes too. Thanks for your email. Tom
  2. T

    MH Pony axle housing seal

    i figured it out. I pulled both axle housings. The differential is held by the left and right bearing retainers. Big job for 2 axle seals. I am doing the bearings while in there as well.
  3. T

    MH Pony axle housing seal

    Thanks Bob. I found a copy of that on the Internet. Parts numbers are a challenge ! I was concerned that if I pull the axle and housing that bolts to the transmission at the tunnel, that the differential gear would drop. It seems the bearing is held in place by the preload "nut". I'm going to...
  4. T

    MH Pony axle housing seal

    Anyone ? Thank you
  5. T

    Onan/ predator engines

    It is well known that the racing go cart community use the small ones. I took one apart for a mini bike refurb and seemed like good quality to me. Tom
  6. T

    MH Pony axle housing seal

    Hello, I have a 1949 Pony. The brakes are soaked with gear oil. I am planning to pull the axle housing And replace the seal and the bearing while in there. If I remove the bearing preload housing to get at the bearing will the " differential" fall ? I am only doing one side at a time. Any tips...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top