Recent content by Tornik550

  1. T

    12v conversion. Is a resistor needed if using a 12v coil?

    I just did the 12v conversion on my 46 Farmall H. I used a new 12v coil that I had laying around from a different project. Is it necessary to use a resistor going into the coil in my case? Any advantages or disadvantages in this situation?
  2. T

    How to repair hole in radiator.

    Somehow I sprung a leak in my radiator. I suspect a bolt or nut flew off, hit my fan and flung into the radiator springing a leak. I took a picture of the spray. You can see it's not super huge however not a small trickle. I personally normally work on air cooled engines so this is...
  3. T

    1946 Farmall H carburetor leak after rebuild

    i just removed my carb and checked the float movement- everything seems to move properly. I did find one interesting thing. When I rebuild the carb, I did not replace the felt in the drip hole. I looked into the drip hole and I did not see any felt at all. I am guessing that the chemicals...
  4. T

    1946 Farmall H carburetor leak after rebuild

    Please note- the picture is of the actual carb after rebuild. The the various screws were not adjusted in the picture. Also, there is a part of the bolt hole missing that holds the two halves together. The bolt seems to hold fine and has never been an issue in the past.
  5. T

    1946 Farmall H carburetor leak after rebuild

    I have a 1946 Farmall H and I recently rebuilt the carb-mainly for cosmetic reasons. When I started the engine for the first time since rebuild, it started right up how it leaked a fairly large amount from the drip (weep) hole on the bottom. I did have the choke on so I turned it off and the...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top