Recent content by tractorfixer1

  1. T

    Open center----Closed center Hydraulics

    Gear pump=open center Piston pump=closed center
  2. T

    How do you do it?

    The tech manual simply states to remove using a suitable puller. I would probably try a three jaw posi-lock puller or some similar arranged puller behind clutch assembly.
  3. T

    O/T Ford Super Duty truck won't start.

    Check to make sure coil has power to it.
  4. T

    Ford 7.5 gas engine- how long do they run?

    Have a 90 with over 300000 and counting. Bought it with 79000 in 96. Oil change every 3000 and going strong. Pulls whatever needed when needed. 97 has 130000 and counting. Put new oil pump and timing train when I got it. 7.5 is good to go. Plenty of power and gets same milage...
  5. T

    Kids Walls brand coveralls, Oh my God !

    might try walmart on line
  6. T

    Anyone have a BS Manual?

    Try this on for size Untitled URL Link
  7. T

    Dodge 360 engine. Valve setting specs?

    CHRYSLER-DODGE-PLYMOUTH "LA" V-8 1964-89 273, 340-360 Cu. In. & 1967-89 318 Cu. In. 1. The majority of these engines have non-adjustable rocker arms. The lifter preload must be maintained between .020" and .060". This may require the pushrod length to be changed. See cam instructions for detail...
  8. T

    Kuhn hay cutter

    Could have been a GMD66 mower 7'10" cut
  9. T

    JD 5320 Question- JDSeller or others

    Sorry did not read the whole.
  10. T

    JD 5320 Question- JDSeller or others

    On the thermostat housing there are 2 temp. sensors. Unplug the larger of these. The wires are hooked into the injection pump timing advance for cold start. If fuse does not open now, either replace the sensor or leave it unplugged.
  11. T

    Best method to remove mildew from siding?

    Use Jomax and Clorox mixed according to directions on Jomax bottle. Spray on with hand held sprayer and rinse clean.
  12. T

    O/T Ford type A automatic trans fluid

    Try this. Type A
  13. T

    Glad I don't own a Deere.........RANT and a half

    Call Green South 7063422332. They should be able to help. Ask for Daniel.
  14. T

    Durham rotary mower

    OK so, Dad acquired this rotary mower with the bolt to hold the stump jumper missing. Machine is labeled as Durham. No other markings or serial numbers or anything can be located. Bolt appears to be (should be) left hand thread. 3/4 is too small and 7/8 is too big. If anyone has...
  15. T

    Ford 4610 SU

    Try this type in 4610 and you can view all Ford/New Holland machines with model number 4610 HERE
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top