Recent content by vicdimatteo

  1. V

    John Deere GP- Oil in Valve sprong cavity?

    Thanks evryone for the replies, and info. Vic
  2. V

    John Deere GP- Oil in Valve sprong cavity?

    Thank you for your reply. I just finished overhauling the engine, new rings, new valves, and guides, and valve seats, etc.. I have restored the untire tractor... and finishing up putting it back together... in about 2 weeks I should be ready to fire it up.. I am very familiar with the rest of...
  3. V

    John Deere GP- Oil in Valve sprong cavity?

    There is no drain... but no way for oil to get in either... The tappets, and cam, and governor are all oiled by an oil line off the pump in the crank case. it sprays up into the governor gears and tappets etc... I am not sure if any oil is supposed to be in there to begin with? But I heard that...
  4. V

    John Deere GP- Oil in Valve sprong cavity?

    Hello, I am trying to find out if a certian oil level needs to be in the valve spring cavity on my 1931 John Deere GP. I am concerned that if the level is up to the valve guide bottom when the intake opens and vaccum sucking in passed the valve... will draw oil in through along the valve/guide...
  5. V

    John Deere 420C Rear main seal size issue

    Thank you, I will look into it. It doesn't look like the SKF seal is spring loaded? The one took out was...
  6. V

    John Deere 420C Rear main seal size issue

    Hello, I am rebuilding my JD420C motor and ran into an issue with the rear main seal ID. The Gasket overhaul kit came with part number AM220T. Problem is it fits loosely over the crankshaft. The seal I removed was spring loaded and fit snug like normal, the new seal (AM220T) is not spring...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top