Recent content by WCarp

  1. W

    AC troubleshooting issue

    I haven't tried checking lately.
  2. W

    AC troubleshooting issue

    Thanks.
  3. W

    AC troubleshooting issue

    The static pressure was approximately 100 psi.
  4. W

    AC troubleshooting issue

    I have not put any gauges on it for several years. As far as I know it was working okay then. There is no stop leak in the system. The expansion value is under the cab cover so at this time it isn't easy to access.
  5. W

    AC troubleshooting issue

    The compressor belt is tight.
  6. W

    AC troubleshooting issue

    Need help troubleshooting a NH Boomer 3050 AC system using R134a. The Mastercool gauges read on low side 71 psi and high side was 112 psi. Second time I tested it, low was 71.5 psi and high was approx. 127 psi. Ambient temp was approx. 85 degrees F and RH was low. The air duct outlet temp was...
  7. W

    Head bolt and head gasket leaking issues on AC G Tractor

    I just finished restoring an Allis Chalmers model G tractor and wanted to make a comment about a problem we had with head bolt and head gasket leaks after the engine was rebuilt. It was on a 48 and the cooling system was apparently not well maintained. The head was not put on by the engine...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top