Recent content by Westville

  1. K

    499 haybine

    Can anyone tell me how to detach the pto pump from the tractor. I can not find any kind of locking mechanism like on normal pto shafts?
  2. W

    Super 55 on ebay ...no PTO?

    John, Is it possible to add a PTO by pulling out the short shaft and installing a long shaft with the PTO gear and clutch at the back of the tractor? Are there holes to mount the PTO clutch assembly?
  3. W

    oliver 1900

    Sounds like it is wet stacking. Have you put under a good load for a few hours lately?
  4. W

    Adding Hydraulics to an 88 with mechanical lift

    The pulley gearbox is in place but I have no real use for it. When the guy who I bought the hydraulic unit from tried to put the S 77 shifter in the 88 mechanical lift, it would not bolt to the old mechanical lift housing (the 2 shifter bolts were spaced further apart on the 88 lift). I have...
  5. W

    Adding Hydraulics to an 88 with mechanical lift

    What are the options on shortening the shaft? I have heard of cutting it off and have also heard talk about getting a shaft designed for the hydraulics rather than the mechanical lift. What is the best way and how much work is it?
  6. W

    Adding Hydraulics to an 88 with mechanical lift

    My 88 had the mechanical lift. I was able to purchase the hydraulic unit (Series 3 ?) from a Super 77 which I understand will work with the shifter from the 77. Is there a way to know if the used pump I bought is good before I put it in? What precautions should I take replace seals? Can a...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top