-
W
Which Ford loader models were normally fitted to pre-65 4000 Industrial tractors?
Hello again. I hit "Post reply" on the previous message before I attached a photo of the diff on the 4030, for reference. -
W
Which Ford loader models were normally fitted to pre-65 4000 Industrial tractors?
Thanks for that info, Tony. It has been a long time, but you may recall that you once found a boom cylinder for me for a 723 backhoe I bought without one. You brought it to IL while you were on a long trip and transferred it to me at a tractor show near the IL/IN state line. RE: the... -
W
Paint for pre-1965 4000 Industrials
Thank you all for your help. I appreciate it! -
W
Need help identifying correct colors for pre-65 Ford 4000s
Hi all. I have two four-cylinder 4000 Industrials I am restoring. When finished, they will be used, not shown, but I still want them to look decent. One was originally red and buff, the other was blue and yellow. I would like to match the original colors as closely as I reasonably can. Two...- wfboquist
- Thread
- Replies: 1
- Forum: Paint and Bodywork
-
W
Paint for pre-1965 4000 Industrials
Hi all. I have two four-cylinder 4000 Industrials I am restoring. One was originally red and buff, the other was blue and yellow. I would like to match the original colors as closely as I reasonably can. Two questions: 1) Are the correct colors available off-the-shelf anywhere, or do I need to... -
W
Which carb is correct for a 4 cylinder 4000 Industrial?
Thanks - for everything. You've helped a lot with my pending restoration. -
W
Which carb is correct for a 4 cylinder 4000 Industrial?
Andy, thank you for that additional info. I greatly appreciate it. Is the document containing the pages you photographed still available for purchase, either as paper or a (pdf?) file? -
W
Which carb is correct for a 4 cylinder 4000 Industrial?
Wow! Thanks to all of you for that info. It appears that the TSX-813 I have in hand will work, once it is rebuilt. Side note: The manifold on the tractor I bought is present, but not usable. I have one that I just pulled out of my attic, and the TSX-813 *will* bolt to it, which is a relief. The... -
W
Which carb is correct for a 4 cylinder 4000 Industrial?
Hi all. I just bought a '63 4000 Industrial tractor that is missing the carburetor. I have an old Marvel-Schebler TSX-813 carburetor that I took off of another 4000 Industrial years ago, but that tractor had been subject to a lot of part swapping before I got it, so I would like to confirm that... -
W
Which Ford loader models were normally fitted to pre-65 4000 Industrial tractors?
I do agree. I also agree that the 730 deserves the word "classic". It is just a better-looking design than, say, the 703. I will probably buy this one or another one that is not as rough. Thank you for the heads-up.. -
W
Which Ford loader models were normally fitted to pre-65 4000 Industrial tractors?
Thanks - I did not know that. I guess the first gear on my 860 will have to do, then. It has always worked, but I think it would work better if I had a way to make the tractor barely creep forward. Another topic - does anyone recognize the model of the loader on the 2000 industrial in the... -
W
Which Ford loader models were normally fitted to pre-65 4000 Industrial tractors?
Thank you both for that additional info. If anyone is interested, the full model and serial numbers are 4030 3 and 162653. I think the serial number makes it a 1962 example. The loader on it was produced by "The Parsons Company", a division of the Koehring Company. The things that induced me to... -
W
Which Ford loader models were normally fitted to pre-65 4000 Industrial tractors?
Thanks. I have a 4140 with the 712 loader, but the 4030 is new to me. I bought it because it has the Elenco front axle on it. I will look for a 725 loader. I know of a 730 that is for sale - will that one definitely not work? -
W
Which Ford loader models were normally fitted to pre-65 4000 Industrial tractors?
Hi all. I just bought a four-cylinder 4000 Industrial tractor. The exact model is 4030. I neglected to write down the serial number, so I don't know the exact year. But the sheet metal looks like the 801 sheet metal, so I *think* it is a 61 or 62. It has a non-Ford loader on it that looks very... -
W
NAA losing hydraulic fluid.
Thank you guys for posting that info. I have the same problem on both of my 800s. Since the hundreds are very similar to the NAA/Jubilee, is it OK for me to apply your advice to Eckert to my own tractors? Thanks in advance.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy