Recent content by WilBury

  1. WilBury

    Case 530CK diesel fuel filters and gaskets.

    Some pictures of the Fleetguard FF138 have the wide gasket on them. I would ask before purchasing. The proper filter with the proper gaskets is getting scarce. I'm sure many of us might have to change our filter setups at some time in the future. Or maybe start cutting our own gaskets. I bought...
  2. WilBury

    Case 311 generator

    Not sure if this applies to you but I've replaced generators & regulators just because I didn't know how to polarize it properly first. I'll bet that archived thread covers that.
  3. WilBury

    Case 430 G188d injection pump seal installation tips?

    I wrap the shaft with saran wrap to protect the sharp edges as I install the seals on the shaft being sure to remove all of it after. Like DT says, plenty of lubriplate or such. Seals lips face away from each other of course & don't forget the oring on the flange. The "special" seal compressor...
  4. WilBury

    Old Case 530ck; New owner questions..

    Yep, that's the preheater relay. Large terminal left I think to hot terminal on starter, large terminal right to manifold preheater, small terminal to pushbutton on dash. 30 seconds or so at a time. Fuel pump return spring is the one wrapped around the base of the lever plus the one on the...
  5. WilBury

    Case 188D oil pan

    I googled "1966 case 530ck oil pan installation" & it mentions this: Cast-Pan Caution: If you have the heavy-duty cast iron oil pan, you may need to grind a small 45° chamfer on the edge of the oil pump to ensure it clears the pan.
  6. WilBury

    G188D case engine

    mEl still builds this particular engine in his sleep blindfolded! - Flywheel at TDC with both #1 (front) valves loose (turn one rev if necessary) ( ignore any front pulley marks) (if you pass the mark, turn back at least a half turn & try again) - One dot on crankshaft gear to two dots on cam...
  7. WilBury

    CASE 530 DIFFERENT CLUTCH PLATES

    Apologies Mr. Saeli, I'm probably referrring to different parts. The G45782 clutch plate or the G37029 facing. All the clutch shop could offer me was to put buttons on my original disc (1 1/4"-10 spline). And, yeah, I definitely noticed it was more grabby, but the replacement pressure plate assy...
  8. WilBury

    CASE 530 DIFFERENT CLUTCH PLATES

    Trouble is, those old one-piece replacement linings aren't available anymore, at least in the 11" size.
  9. WilBury

    188 Diesel Quandry

    Is that a thing?
  10. WilBury

    Case 310E and 310F Crawler

    Post back if you make any progress. My new battery boxes would like that! I'll keep my eyes peeled for good photos.
  11. WilBury

    New case 310 crawler

    I'm on the west side of trhe continent, so prolly not worth shipping anything I've got. All kinds of used parts dealers out your way including the ones that support this site. If you can find your engine in the parts manuals, search the manifold part number & presto.
  12. WilBury

    Case 310E and 310F Crawler

    Never seen a good set. Might have to find some artist who can copy an old photo.
  13. WilBury

    New case 310 crawler

    Congrats on the new toy, you'll love it! There could be a mix of parts on your machine. For instance, the rear supports on the ROPS were made from the main loader arms on a 310 loader. The grill matches 310E, same as mine. The shop manual is pretty much "one size fits all", covers the whole 300...
  14. WilBury

    CASE Parts Books On-Line----NOT!!

    Obsolete parts houses?!? Would you care to drop a few names?
  15. WilBury

    CASE Parts Books On-Line----NOT!!

    The AVSpare site lists all parts incuding obsolete & Messicks has updated their website with decent diagrams and full parts lists, too.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top