Recent content by Williamarsenault

  1. W

    1194 clutch function

    Oh strange ok we better check that in the morning before I get into trying to break something free that may not be there . There is likely 2 inches or so of free play before weight comes on the linkage
  2. W

    1194 clutch function

    With the pto clutch handle down I can activate the pto itself using the next handle back to engage the pto shaft but still get no noise or sign of life from my hydraulic remotes or 3 point hitch shaft . What leads me to believe the clutch is stuck to the pressure plate is when you depress the...
  3. W

    1194 clutch function

    Ok thank you RG this is what I thought but wanted to be sure before I try put it in high gear and chain it to another tractor to attempt to break it free! Is there anything that needs to be done on these tractors to engage the hydraulic pump or is it engaged all the time ? This unit has no...
  4. W

    1194 clutch function

    Hey guys finally got this 1194 with no hydraulic function what so ever back to the shop but now added another set of problems . I suspect the clutch plate is stuck to the flywheel . When the clutch is depressed it moves one lever on the side of the transmission my question is should it move both...
  5. W

    Case 1194

    Hey guys and gals Currently I have a 1194 case (db) in the shop with no hydraulic function . It is outfitted with a loader operated by the remotes . I have no function in 3 point hitch or remotes . Fluid is clean Filters are recent what am I missing here fullas ? Does the pto need to be...
  6. W

    1120 3pt hitch calibration

    Excellent thank you tx Jim much appreciate it !!
  7. W

    1120 3pt hitch calibration

    Hey guys I'm having a few issues with The new to me 1120 I Posted a thread yesterday about my diff lock now let's get into this issue ! My three point hitch lifts high very very high . With my blower on if the arms creep up which they tend to do it will bind my pto shaft up at a steep angle...
  8. W

    1120 differential lock

    Hey guys me again on this never ending 1120 I picked up , todays problem is I have just found out (our first real storm ) that my rear differential lock is not engaging . The handle and foot pedal (both on one unit for some reason) move freely but when depressed does not lock in the opposite...
  9. W

    1120 rear Scv problems

    I have the top photo style , you were 100% correct In those cams being wore the rack and gear is wore enough to slip over a tooth , I priced the parts from Deere 🤢 I have decided to go with a after market closed loop 2 spool valve and mount it low on my fender and remove the old system ...
  10. W

    1120 rear Scv problems

    This evenings update - I disassembled the entire block and Inspected all the components and spools , everything looks perfectly fine with minimal wear the only thing I could be into is a possibly wore cams in handle assemblies causing the spools to perhaps not run in sync with each other . I...
  11. W

    1120 rear Scv problems

    Yes I agree I guess the next step will be to tear them apart and get a breakdown from my dealer
  12. W

    1120 rear Scv problems

    That was my initial thought just seems strange for both to be doing the exact same thing
  13. W

    1120 rear Scv problems

    UPDATE this morning I tested individual scvs for pressure on bank 1 - left side with handle forward 2800psi right side handle rearward 0 Bank 2 - left side handle forward 2600 psi right side handle rearward 0 It seems the valve is not opening for pressure and also not opening the return...
  14. W

    1120 rear Scv problems

    They are both new but thats not to say they are both working , good thinking I will try change them today just incase
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top