Recent content by Wingswd

  1. W

    farmall 200

    Did not see it what side? And is that the only place?
  2. W

    farmall 200

    I picked up a nice 200 for a great price. It has no serial tag. I'm generally an orange guy so I'm not very familiar with these. Would the serial # be any where else on this tractor?
  3. W

    Farmall 200 loader

    Do they have any value?
  4. W

    Farmall 200 loader

    I have a loader off of a Farmall 200. Just wondering if any one would know what else it would fit?
  5. W

    Air tube for WC

    Thanks to all for the info
  6. W

    Air tube for WC

    working on restoring it
  7. W

    Air tube for WC

    I just picked up an unstyled WC I'm in need of an air tube (filter to carb) for it. Would any one have one to sell?
  8. W

    Farmall cub

    I asked a question on Sat about a governor on a cub. Can the rpms be adjusted on the governor? full throttle rpms are way to low. It seems to be adjustable, but I don't just start turning things.
  9. W

    Farmall cub

    Guys I collect orange tractors. Not use to the red ones. I"m working on one for my dad. It runs great, but I can"t seem to get the rpms up high enough at full throttle. It looks like the governor Is adjustable. Is it? How can I increase the rpms. At full throttle it is just alittle above an...
  10. W

    D17

    story is I've had this tractor for a long time, It started running a little weak And had a small pop in the muffler. determined it to be a vacuum leak on the manifold. #3 was lean, that was it. While I had it apart I decided to do a valve job on it. that is were all this started
  11. W

    D17

    Wasn"t much of a ridge. Just looking when the head was off did not show me much to worry about. It never smoked a lick. I guess I can get the pan off without splitting it(it"s a wide front). My big worry, that is also the pain in my rear is to get the deck checked for straight, Because I don"t...
  12. W

    D17

    I now anything is possible, But what are the odds of a warped deck on a tractor that ran.
  13. W

    D17

    I"m afraid I know the answer, but I"m going to ask any way. I guess 80psi of compression is not enough 226 engine to fire. I"m at a loss. I drove this tractor into my shop, ran a little weaker than I thought it should. I thought a valve job would help bring back it"s youth. Lapped the valves...
  14. W

    D-17 Not running well

    I also think you need to check the intake. Had the same problem with mine. Check plugs 2 and 3. If they are lean I would start there.
  15. W

    Wide front C

    So a C with a bow front axle Probably has a B axle under it
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top