(800) 853-2651
SHOP NOW

Recent content by ziffel

Yesterday's Tractor Forums
  1. Z

    Arnie Meyer, Sad news

    NO
  2. Z

    1650 GAS FUEL PUMP

    I'm sorry if I ruffled anyone's feathers. I only posted what has worked for me. I have been working on Oliver tractors since 1962. It will never happen again. LAST POST.
  3. Z

    1650 GAS FUEL PUMP

    The problem with a block mounted mechanical fuel pump is vapor locking. With a block mounted pump the gas travels in a steel gas line along the right side of the block to the pump and back up the side of the block to the rear of the engine where it is routed behind the block and on to the carb...
  4. Z

    1650 GAS FUEL PUMP

    But I wonder how a 1650 gas ended up with a mechanical fuel pump. Clean the sediment bowl and install an inline filter.
  5. Z

    1650 GAS FUEL PUMP

    No fuel pump on a 1650 gas unless it has had some modifications done it. Possible engine change or someone added a pump. We have a 1650 at the farm. The fuel is gravity fed from the bottom of the rectangular tank to the carb. If you put an electric fuel pump on it don't exceed 5.0 psi. The...
  6. Z

    1850 3 speed leaking

    Most of us would separate the the hydra power from the engine while out of the tractor unless it just had a clutch job.
  7. Z

    1550 Holley Distibutor

    I have been bolting the sliding block the points are mounted to down so it can not move. The block wears and the point setting cannot be maintained. Take the vacumm advance off and clip the link. Put it back on to keep dirt out. Remove the vacumm line and plug the hole at the manifold. Before...
  8. Z

    1550 seems a little weak

    Does the engine seem to loose power or is the blower loosing speed?
  9. Z

    1954 Oliver 77 hydraulic flow

    Controls the speed of flow when the cylinder is retracting. Keeps it from bouncing when going down.
  10. Z

    Oliver ? conn rod and sleeve/piston 3 7/8

    I found on the net these are from an 1800 diesel.
  11. Z

    1850 steering

    We have an 1850D that used to do that a couple times each summer. I got to be an expert at taking the priority valve off, tearing it apart, rinsing in a pan of gas, and putting it back. Often out in the field. Finally found a different style valve on a parts tractor. Has not done it since. They...
  12. Z

    Oliver transmission woes

    Most likely seized input shaft.
  13. Z

    Oliver 60 Row Crop Transmission issue.

    Check the detents.
  14. Z

    Jim Ludlum

    We lost a first class Oliver mechanic, friend, and all around nice guy who was always willing to help. He worked at the Farmers Store in Mineral Point, Wi. He was one of the two fireman killed on their way to an accident.
  15. Z

    Oliver disc ID

    Pick out a tire size that gives you the the operational range that works. Does it raise high enough for transport and does it lower enough to be effective when in the ground.
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top