VENTURY DIRECTION

[gostby]

I didn't follow directions and failed to mark which end was up on my 2n . MS carb. One end has a flat side the other end just flairs out, no flat surface. Any help would be welcomed. Thanks, Gary

 

[soaked]

Hi gostby,
Fit the venturi in the gasket then align it like this

 

[gostby]

Works perfect. Thank you Mad and knowledgeable Farmer. Gary

 

[BodaciousGaming]

If it’s helpful to you, I’m attaching the MS service manual that I have. The diagrams are a bit washed out, but it helps with most common troubleshooting.

 

[gostby]

If it’s helpful to you, I’m attaching the MS service manual that I have. The diagrams are a bit washed out, but it helps with most common troubleshooting.

BodaciousGaming: Thank you for the manual. Most helpful. Gary

 

[soaked]

Works perfect. Thank you Mad and knowledgeable Farmer. Gary

Gary,
Guess my pic was of zero help.
Mad and knowledgeable Farmer has not even submitted a post to your thread here...

 

[gostby]

Gary,
Guess my pic was of zero help.
Mad and knowledgeable Farmer has not even submitted a post to your thread here...

Soaked: Your pic was used to fix the carb. I thought I sent a thank you but with my computer skills I guess i went somewhere else. Again, thank you. The service manual was also very helpful. Gary

 

[soaked]

You are welcome, see you next time