Hot Welding an Unstyled G head

[Le9102011]

Anyone out there know of any machine shop that has any experience hot welding a Unstyled G head. Talked to Murphy's motor service and they are no longer doing that work so now its off to the races to find someone that will beef up an Unstyled G head. Any help would be much appreciated

 

[TSK]

Where are you located?

 

[rustred]

Anyone out there know of any machine shop that has any experience hot welding a Unstyled G head. Talked to Murphy's motor service and they are no longer doing that work so now its off to the races to find someone that will beef up an Unstyled G head. Any help would be much appreciated

Anyone out there know of any machine shop that has any experience hot welding a Unstyled G head. Talked to Murphy's motor service and they are no longer doing that work so now it’s off to the races to find someone that will beef up an Unstyled G head. Any help would be much appreciated

Anyone out there know of any machine shop that has any experience hot welding a Unstyled G head. Talked to Murphy's motor service and they are no longer doing that work so now its off to the races to find someone that will beef up an Unstyled G head. Any help would be much appreciated

what’s wrong with the head ? Cracked ?

 

[rustred]

Is it cracked ? What’s with hot weld. ?

 

[JIM MN]

Hot weld? Put whole head in the a furnace, get red hot, then weld up, machine out. In Iowa, Nevada 1700 W F Avenue, was Williams Cylinder Head, Midwest Cylinder Head, now Arnolds Motor Supply 1-515-382-2791, M-F 730-500..

 

[Ray,IN]

Hot weld? Put whole head in the a furnace, get red hot, then weld up, machine out. In Iowa, Nevada 1700 W F Avenue, was Williams Cylinder Head, Midwest Cylinder Head, now Arnolds Motor Supply 1-515-382-2791, M-F 730-500..

IMO that's the only way to successfully weld cast iron.

 

[Fixingfarmer]

Arnold’s will also send it down to Neveda on one of their trucks from any of their locations which is handy

They have some lead time. 3 months was the last thing I sent if it’s a summer puller best get it there pronto.

There’s a machinist in Riceville Iowa who also does this with a lead time of about a week. Never had an issue with either place.

 

[StanIowa]

Nevada no longer does welding. could not keep a good welder. got rid equipment.

 

[maqbill]

Hot weld? Put whole head in the a furnace, get red hot, then weld up, machine out. In Iowa, Nevada 1700 W F Avenue, was Williams Cylinder Head, Midwest Cylinder Head, now Arnolds Motor Supply 1-515-382-2791, M-F 730-500..

They did a great job on my 720 years ago, I would recommend them.