Steering Knuckle Post for a 1954 Super A

[Farmer Broome]

Looking for a good used Steering Knuckle Post for both sides of my 1954 Super A. Mine have been welded twice now on both sides and they won't hold up anymore, please see the attached photos. Are there any good used Vintage Tractor Salvage Company's in Canada? Inquiring from Nova Scotia, Canada.


Farmer Broome

 

[SkipperII]

Sorry, don't mean to be a smart a--, but it loooks to me like, if the spindles were removed from the housings, and the grease completely cleaned off, and out, the old weld ground to clean metal, the spindles reinserted, to keep them aligned, a GOOD welder could repair those. It looks like there was no penetration on the upright tube.

 

[trackrat]

That's what I see too take them off and go to a good welder, even if he has to do a little fish plate on them, they can be fixed and made to hold up, look good

 

[wh]

And I vote to fix what you have. Does not look like a hard fix. Clean the paint back. Grind the welds out and weld it up.

 

[used red MN]

Here are some NOS parts that appear to be available in the SE US. They command quite a price. I’m not sure what it would cost to ship them to you if they even offer that option. At least that will give your the part number.
Super A Axle Extension

 

[rustred]

Looking for a good used Steering Knuckle Post for both sides of my 1954 Super A. Mine have been welded twice now on both sides and they won't hold up anymore, please see the attached photos. Are there any good used Vintage Tractor Salvage Company's in Canada? Inquiring from Nova Scotia, Canada.


Farmer Broome

I also say them spindles can be welded with an experienced welder. Those are poor welds. Now it has to be all ground out and start fresh. And with a gusset also.

 

[chico1]

Looks like you have a great opportunity to get your adjustable axles freed up!

 

[Tractorcedric]

Looking for a good used Steering Knuckle Post for both sides of my 1954 Super A. Mine have been welded twice now on both sides and they won't hold up anymore, please see the attached photos. Are there any good used Vintage Tractor Salvage Company's in Canada? Inquiring from Nova Scotia, Canada.


Farmer Broome

Now I have to go look at the one I welded on my A, a couple years ago.