Char-Lynn Power Steering K-445-A

[kew71]

I need to rebuild the steering box on a Char-Lynn K-445-A power steering setup. Things came apart when I pulled the steering wheel during a restoration. Any idea where to source the seals, and such or a full re-build kit?

 

[Hobo,NC]

I need to rebuild the steering box on a Char-Lynn K-445-A power steering setup. Things came apart when I pulled the steering wheel during a restoration. Any idea where to source the seals, and such or a full re-build kit?

Is this what your are referring to https://www.ebay.com/itm/285640567978 I assume you are looking to the steering box parts and not the hydraulic motor?

 

[used red MN]

Looks like some are available through the dealer.
The following is a link to an online parts catalog for a dealer in PA. I choose the 600 per Hobo’s linked manual which indicates that is a model it is used on.
Messicks Ford 600 PS parts
Here is a link to the manufacturer’s online parts catalog
CNHI Ford 600 PS parts
Those links will allow you to look at all parts diagrams for your tractor. If you have a different model I can instruct you how to switch to it, if you need more info let me know.

 

[kew71]

Is this what your are referring to https://www.ebay.com/itm/285640567978 I assume you are looking to the steering box parts and not the hydraulic motor?

Correct

 

[Hobo,NC]

Use "use red MN links to get the part numbers and search for them using CNH part numbers, are use https://www.yesterdaystractors.com/Ford-600_Steering-Sector-Kit_S67109.html

That's an original box converted to use a Char-Lynn hydraulic motor are the way I see it.

 

[kew71]

Is this what your are referring to https://www.ebay.com/itm/285640567978 I assume you are looking to the steering box parts and not the hydraulic motor?

I am looking for the seals/bearings in the steering shaft.

 

[Husker 50 8n]

I am looking for the seals/bearings in the steering shaft.

Did you find the parts? I do have a Char-Lynn PS system I took off a model 841, should be the same as yours. It was working when I removed it.

 

[kew71]

Did you find the parts? I do have a Char-Lynn PS system I took off a model 841, should be the same as yours. It was working when I removed it.

I just need mine rebuilt. It worked. But took the tractor apart for restoration. How much?