Old coats tire changer HELP

[oliver660NC]

 

[oliver660NC]

Im looking for 1 of these, if any of yall got 1 to let go. I appreciate it.

 

[Keith True]

Years ago I picked up a Coats 2020 without that hold down,and the bar,(iron).That's why the machine was free.I found a place in Mass.called,Garage Equipment.They had used stuff there.I have no idea if they are still in existance or not.

 

[JOCCO]

Im looking for 1 of these, if any of yall got 1 to let go. I appreciate it.
View attachment 149901

That is very similar to mine. not even sure that is coats there was another brand. Also note that top post spindle there is at least 2 different sizes, thatI know about.

 

[Duner Wi]

That is very similar to mine. not even sure that is coats there was another brand. Also note that top post spindle there is at least 2 different sizes, thatI know about.

I have a Big 4 by Studebaker that has part circled ,looks same or very close .

 

[JOCCO]

I have a Big 4 by Studebaker that has part circled ,looks same or very close .

Yes that was the other name I could not think of, Big 4 he should look it up online.

 

[oliver660NC]

i cut the center out of an old implement rim, fortunately the three holes line up
on the farmall m fron rim. three bolts keep it from spinning. works on both
my tire machinesView attachment 149790View attachment 149791View attachment 149792

What holds the disk?

 

[Duner Wi]

What holds the disk?

See post #22. The red part circled puts the squeeze on.

 

[oliver660NC]

See post #22. The red part circled puts the squeeze on.

Thats the part I dont have. Just have to wait till 1 turns up

 

[Duner Wi]

I have 2 pieces that serve the same purpose. The other one has smaller OD , maybe 2 1/2 inches. It gets used but not nearly as often.

 

[oliver660NC]

I have 2 pieces that serve the same purpose. The other one has smaller OD , maybe 2 1/2 inches. It gets used but not nearly as often.

Well if run across 1 hit a fella up. Lol. Mine is useless until I get the wheel lock.

 

[oliver660NC]

Found it yall!!!! I appreciate all the help

 

[Duner Wi]

Found it yall!!!! I appreciate all the help
View attachment 150966

Good for you.