I put a brand new starter on my 2130 John Deere tractor. First time I tried to start the starter, stuck on and only stopped when I pulled off the cabl

[jmcrow]

I have a 2130 John Deere tractor I put a new starter on because the old one burnt out when it’s stuck on starting. The first time I tried to start the tractor. It’s stuck on and didn’t stop until I pulled the cables off the post on the batteries. Does anyone have any ideas? What could

 

[jmcrow]

Did new starter come with bendix gear ? If not and you used old gear on new starter, the gear/spring is bad. If new starter came with gear/spring, teeth flywheel might be damaged. If tractor has a removable cover, remove it to inspect teeth on flywheel. If you don't see damaged teeth at first, rotate flywheel with screwdriver (if possible, a 4L diesel is a chore). You can also see several teeth by removing starter.

I pulled the wire off the solenoid check the switches put the wire back on and bent the wire a little bit away from the starter motor and now it doesn’t seem to stick. Thanks very much for the help.

 

[used red MN]

I took the solenoid wire off, put it back on after I checked the switches, bent it away from the starter and now it doesn’t seem to stick

You don’t have to make a reply to each person if you are saying the same thing. Something like this you can just type in the reply box at the bottom of the thread and say “thanks everyone!…. Everyone can see it just as you do.

 

[jmcrow]

You don’t have to make a reply to each person if you are saying the same thing. Something like this you can just type in the reply box at the bottom of the thread and say “thanks everyone!…. Everyone can see it just as you do.

Ok thanks