(800) 853-2651
SHOP NOW

Need bearings for a Farmall SA-140 Rolling Cultivator

Yesterday's Tractor Forums
R

RTR

Well-known Member
Does anyone happen to have a part number for the bearings that this rolling cultivator takes? One on each side. Best I can tell is the center collar goes with the bearing. Going to a local parts store tomorrow with the old bearing but would be nice to have a head start. They are at work or i would measure them. A guy at work today quickly measured ID and I THINK he said somewhere around .91-.92 inch.
IMG_1632.jpeg
IMG_1635.jpeg
 
Looks like lilliston rolling cultivators. We ran 2 sets in the sweet potato farming. Never had a bearing problem but they should be available. I know agri supply sells the cultivators today. Maybe they have parts. Bingo. Just looked up agri supply May be what you need.
 

Attachments

  • IMG_0433.png
    IMG_0433.png
    828.1 KB · Views: 18
  • IMG_0434.png
    IMG_0434.png
    710.3 KB · Views: 18
Hmm, you think those sleeves are meant to be removed and stay with the cultivator? I’ll try to get the parts locally but will definitely get from agri-supply if needed.
IMG_1642.jpeg
IMG_1641.jpeg
 
I found the correct bearings with sleeve on the Agri-Supply website. FYI for anyone else looking. They also had a spare spider wheel and a dirt scraper which mine had that were broken. These will be like new now. Not sure if the replacement (probably imported) cast spider wheel will hold up, but we will see.

Bearings like I have are Fafnir Part Number 205ppb7 , which is a common ag bearing.
  • BORE: 0.93" Round
  • Outside Diameter 2.04" Spherical
  • Inside Race Width: 1.37"
  • Outside Race Width: 0.59"
 
RTR said:
I found the correct bearings with sleeve on the Agri-Supply website. FYI for anyone else looking. They also had a spare spider wheel and a dirt scraper which mine had that were broken. These will be like new now. Not sure if the replacement (probably imported) cast spider wheel will hold up, but we will see.

Bearings like I have are Fafnir Part Number 205ppb7 , which is a common ag bearing.
  • BORE: 0.93" Round
  • Outside Diameter 2.04" Spherical
  • Inside Race Width: 1.37"
  • Outside Race Width: 0.59"
Click to expand...
Look up the Big bearing store.
 
  • Like
Reactions: RTR
You must log in or register to reply here.
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top