Little help please…dust cover?

[65Camp]

Guys I have an assortment of dust covers. The one in the photos fit the best but I’m pretty sure it’s not correct? If not do you have a photo you could share? Thanks!

 

[Royse]

None of the ones I found seemed to fit exactly either, but those look like the ones I ended up using. I think as long as they keep dust out, they'll work. Mine have been in place for 8 years now.

 

[Ray,IN]

IMO, they will work. All it does is keep in grease and dirt out. They are not designed to be waterproof.
The original is small at the top and large at the bottom. source: https://www.yesterdaystractors.com/Ford-8N_Tie-Rod-Boot-Assortment_TIERODBOOTS.html

 

[65Camp]

None of the ones I found seemed to fit exactly either, but those look like the ones I ended up using. I think as long as they keep dust out, they'll work. Mine have been in place for 8 years now.

They will be the ones I’ll use. Thanks for your help!

 

[65Camp]

IMO, they will work. All it does is keep in grease and dirt out. They are not designed to be waterproof.
The original is small at the top and large at the bottom. source: https://www.yesterdaystractors.com/Ford-8N_Tie-Rod-Boot-Assortment_TIERODBOOTS.html
View attachment 153261

I’ll use the ones shown in my photos. Thanks!

 

[Genr8rs]

I used the ones in your photos. Semed like the best tightest fit. The others in Rays photo is an option but the larger end would go upward to the greased ball joint but with steering movement it wouldnt stay tight. I used yours.

 

[65Camp]

Fired her up this morning and idle up and down for 1 hour. Let it cool and retorque head and manifold. Everything went good! I’ll move forward with the sheet metal painting now. However, it will be a slow process!!