#60 4 bolt plow shares

[36b A]

Looking for plow shares and the number is kinda messed . Looks like 04 14 -4 or 01 41-4 hard to tell . This don't match any number in shoup catalog . There number is R44144 . I don't want to order them for a customer and have to return them if not right .

 

[36b A]

 

[wwoodrow]

Looking for plow shares and the number is kinda messed . Looks like 04 14 -4 or 01 41-4 hard to tell . This don't match any number in shoup catalog . There number is R44144 . I don't want to order them for a customer and have to return them if not right .

No expert, but I think those first two letters or numbers generally denoted the brand.

 

[Jim Becker]

That number looks to me like something an aftermarket supplier used. (There is one on eBay right now with the same number. They don't claim to know what it is either.) The part itself looks to me like a Super Chief. Can you verify that? As far as I know, Super Chief shares came in 3-bolt and 4-bolt varieties and were otherwise interchangeable as long as you got the length you needed.

 

[wwoodrow]

That number looks to me like something an aftermarket supplier used. (There is one on eBay right now with the same number. They don't claim to know what it is either.) The part itself looks to me like a Super Chief. Can you verify that? As far as I know, Super Chief shares came in 3-bolt and 4-bolt varieties and were otherwise interchangeable as long as you got the length you needed.

 

[wwoodrow]

 

[wwoodrow]

That is for a Super Chief-thought photo may help.

 

[36b A]

I can't read anything on the back saying super chief or other .

 

[36b A]

That is for a Super Chief-thought photo may help.

These holes don't measure the same as your picture . Unless it's a 16 inch

 

[wwoodrow]

Could it be 01 14-4 ? I meant the photo was for a Super chief. Not necessarily that yours is a Super chief. If you have dimensions between holes, and overall length, etc. I bet you can match it up.

 

[Jim Becker]

Looking at a couple aftermarket listings, it appears that "14-4" is used on some of their part numbers to indicate a 14-inch 4-bolt share. They probably all interchange. Since yours is marked "14-4" any of them will probably work.

 

[plow peddler]

OI stands for Osmundson International point

 

[IHCPloughman]

All four holes in line tell me it is not a Super Chief or Terra Flo share, thus not IH. Do you have a part number from a moldboard or just a picture of the moldboard and bottom to help ID?

 

[36b A]

All four holes in line tell me it is not a Super Chief or Terra Flo share, thus not IH. Do you have a part number from a moldboard or just a picture of the moldboard and bottom to help ID?

I did have but I'll get more when I get to work . Someone sprayed something on them can't read anything on the backs .

 

[36b A]

All four holes in line tell me it is not a Super Chief or Terra Flo share, thus not IH. Do you have a part number from a moldboard or just a picture of the moldboard and bottom to help ID?

 

[36b A]

Had to get down further here's the moldboard number and short brace brace

 

[300guy]

If you take the 462 number and do a search for it you will find one on Parts ASAP.

 

[BarnyardEngineering]

The 462313R1 part number is a Super Chief Moldboard. It's a Super Chief bottom. Any commonly available 4-bolt Super Chief share will fit it. Bolt hole pattern is the same on all widths. You can put 14", 16", even 22" shares on that bottom if you want.

I can't read anything on the back saying super chief or other .

The "Super Chief" is a sticker, and would only have been on the original moldboards. If they have been replaced, no sticker.

 

[36b A]

Thanks guys parts are on the way