IH 364 diesel British

[Dee L.]

I'm working on my IH 364 that was made in England.
It's been tough finding the right parts since it's both old and foreign-made. Right now I'm looking for washers for the adapters (banjo fittings) that connect the hose to the powering steering cylinder. We tried copper washers but it's still leaking. The original washers are metal with a (quad) rubber inner. (no part number listed in the parts manual) Just thought I would ask here and see if anyone else had any leads to find parts.
Thanks!
-Dee

 

[MARK ROBKE]

I'm working on my IH 364 that was made in England.
It's been tough finding the right parts since it's both old and foreign-made. Right now I'm looking for washers for the adapters (banjo fittings) that connect the hose to the powering steering cylinder. We tried copper washers but it's still leaking. The original washers are metal with a (quad) rubber inner. (no part number listed in the parts manual) Just thought I would ask here and see if anyone else had any leads to find parts.
Thanks!
-Dee

I would try a hydraulic shop-one that rebuilds cylinders and can fab metal lines. Maybe a Napa or parts store, but I would lean towards a specialty hydraulic shop. Mark.

 

[used red MN]

I saved these from old A/C R12 to 134A conversion kits. Not sure if they will stand up to PS pressure. An A/C runs upper 400ish max. I think these are seals for the line manifold to compressor.

 

[Dee L.]

I would try a hydraulic shop-one that rebuilds cylinders and can fab metal lines. Maybe a Napa or parts store, but I would lean towards a specialty hydraulic shop. Mark.

Thanks Mark!

 

[Jim.ME]

McMaster Carr has several types the linked ones appear like the ones in usedredMN's picture

Sealing washers

 

[Dee L.]

View attachment 155706I saved these from old A/C R12 to 134A conversion kits. Not sure if they will stand up to PS pressure. An A/C runs upper 400ish max. I think these are seals for the line manifold to compressor.

Thanks Used Red MN, I think the pressure is about 800lbs. in the power steering system. But good to know more about where else this type of washer/seal could be used.

 

[Dee L.]

McMaster Carr has several types the linked ones appear like the ones in usedredMN's picture

Sealing washers

Thank you Jim I will check those out.