Anyone used one of these, Bolthero?

Duner Wi

Well-known Member
I could have used one the other day. There is a one minute video if you can find it .

 
 
I am curious how robust it is. Supposedly the cats meow for getting a couple of spark plugs out of 20 year old Ford V8 pickups that like to break off. I installed a serpentine belt tensioner last week in old Saturn S that I did not remove motor mount to gain a little room . I was designing this very tool in my head and yesterday BIL sent me the link.
 
I could have used one the other day. There is a one minute video if you can find it .

just by looking at the picture I think my ratchet could get in there
 
We had one similar to that for getting at bolts when doing alignments. Been so many years ago that I don't remember what vehicle it was intended for, but it was something from the 70s or early 80s. Something broke in it and the chain started slipping.
 
I purchased an inexpensive lookalike. My anticipated use will be to remove fastener after I get it broke loose. I won't be applying 50 lbs torque.
 
Some people have trouble accessing a couple of plugs on right bank near the firewall with out breaking the porcelain. I don't have a Triton V8 so don't really know. That is what I read. I imagine if you changed plugs sooner than recommended it might help too.
 
I could have used one the other day. There is a one minute video if you can find it .

 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top