Ford 5200 7200 Row Crop Steering Wheel

[deereboy4020]

Looking for a good original deep dish steering wheel and center cap. Willing to pay up to $500 depending on condition.

 

[Destroked 450]

Those are unicorns today

 

[Ultradog MN]

Looking for a good original deep dish steering wheel and center cap. Willing to pay up to $500 depending on condition.

Not sure if a 5200 steering wheel is the same but I went through that on a 4200.
I bought a new steering wheel off a Massey Ferguson that was very close in shape and size. I cut the center hub out of the old steering wheel then had a friend machine the new one for a tight press fit. Then welded a couple tacks to keep it in place.
I was going to make a new cap out of black delrin and cement a ford oval on it but ended up selling the tractor that way.
If you live near the Twin Cities I could do that job for you.

Post in thread 'Row Crop steering wheel'

Jan 30, 2023

Sure!
Now you tell me.
When I rehabbed my 4200 I could find a
steering wheel that was deep dished but not
with ths right splines.
I ended up buying one for a MF tractor,
boring out the hub, then pressing the old
hub into the new steering wheel.
It was a lot of farten around.
If is nearly identical to the original dish
and diameter though.

• Ultradog MN

 

[paul]

The cap is loose on my 5200. Finally put it in the tool box so I don’t lose it, was always popping off.

I guess I did good.

Paul

 

[deereboy4020]

Ended up designing then 3D printing a center section. Then used my original steering wheel using flexible bumper repair filler to fill the gaps. I lucked out and found a NOS center cap. I think it turned out pretty good.

 

[KCTractors]

I had a Ford 5200 with cab, I think that it was a Hiniker cab. It was a gaser but I used it main on a snow-blower. That was a great tractor, I wish I still had it but it was to nice of a tractor to set outside in the elements.