Anyone Know What This Is? Old Plow Part?

I should have laid a shovel beside to give a better indication of it's size.

It's between 4 and 5 ft. long.

I pulled it with my tractor out of ground and dragged it over to in front of my IHC plow.

Found it buried beneath the soil while removing brush at the spot I have rented to park my old implements.

It does have a notch at the lower front which may help identify what it is.
 

Attachments

  • plow share.JPG
    plow share.JPG
    6.4 MB · Views: 0
I should have laid a shovel beside to give a better indication of it's size.

It's between 4 and 5 ft. long.

I pulled it with my tractor out of ground and dragged it over to in front of my IHC plow.

Found it buried beneath the soil while removing brush at the spot I have rented to park my old implements.

It does have a notch at the lower front which may help identify what it is.
What kind of material is it? I would sooner guess it's petrified wood, or bone!
 
Looks to be made of metal to me, zooming in on the picture. I would bet the notch at the wide end is where a latch holds it in place.
 
May be wrong.
But it appears me to be a spud for an old cable trencher.
 

Attachments

  • vermeer_lm_25_cable_plow_trencher_boring_setup_6_lgw-3407229272.jpg
    vermeer_lm_25_cable_plow_trencher_boring_setup_6_lgw-3407229272.jpg
    137.8 KB · Views: 0
???

Must have belonged to Paul Bunyon? :)
When I zoom in on it I see wood grain. All non stainless steel or galvanized metal I have ever pulled out of the ground is a rusty brown.
Wood?? Well then I changed my mind..

Appears to be the rudder off of a Mississippi steam boat.
 
What kind of material is it? I would sooner guess it's petrified wood, or bone!
sorry for not answering sooner, been away for a few months pre-occupied with other things.

This object appears to be cast iron.

I used a tractor to drag it over to where it is on the ground.

I will take a photo with a shovel laying beside it to give a better indication of it's size.

I never measured it but must be between 4-5 ft. long.
 
Some kind of blade, don't know to what it would attach.
Looks to be made of metal to me, zooming in on the picture. I would bet the notch at the wide end is where a latch holds it in place.
That notch (filled with dirt) at the front bottom is going to help indentify it.

Also found buried at that site were an old pair of tongs.

I have not researched what businesses were located at that site but a few hundred meters away is the sydenham river and logs used to come from upstream in the 1800's.
 
It looks like a straight jointer to me. It went on the beam ahead of the bottom on a horse drawn walking plow and sliced like a rolling coulter. I've got a walking plow or two here with them.
 
Here is new photo to give a better idea of the size of thing.

There is a small hole at the top but it would be to small if this were a tilling device in my estimation.

That notch bottom front would indicate it sat on a beam or support of some kind and possibly be controlled with a cable to the small hole at the top.
 

Attachments

  • unknown object.JPG
    unknown object.JPG
    3.6 MB · Views: 0
Here is new photo to give a better idea of the size of thing.

There is a small hole at the top but it would be to small if this were a tilling device in my estimation.

That notch bottom front would indicate it sat on a beam or support of some kind and possibly be controlled with a cable to the small hole at the top.
Oh, 4 or 5 FEET long. I read it wrong as 4 or 5 inches long. Sorry.
 
An Essex would have used a molibdenum feeler.
Since he stated it was cast and near the Sydenham River my guess is a rudder for a return flue Huber steam engine.
Yes I would have to agree with you, my great grandfather had a major core breach in the reactor that coupled with the propulsion and the corresponding directional systems. Sadly his owners manual and parts book where sitting on the reactor, after the catastrophic meltdown, they only recovered about three cases of aluminum beer cans. Yes I know they did not have aluminum beer cans in my great grandfathers day. So, we will talk about time travel another another day.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top