AC 400 series cultivator

[steve(MI)]

I recently purchased a 400 series cultivator for my D14. Most everything was there except for two of the lift rods so I am going to have to fabricate them.
My question is how long were they? The parts manual shows part# 332382 and it appears to fit both the 200 and 400 series cultivator. Only the forward rod was different in length depending on whether you put the cultivator on a D14 or D17.

If anyone has a 200 or 400 series cultivator and can measure this rod it would save me a great deal of time cutting and threading to the correct length. Attached a pic from the parts book. It's #4 in the diagram.

Thanks in advance
Steve

 

[steve(MI)]

As a follow-up it would help to know the length of the front rod as well as the length of the rear rod. Since this was originally on a D17 the length of the front rod will be longer than what would have gone on the D14 so length of both would be beneficial. I am assuming I have #6 for the D17 and need the length of #8 for the D14.