IH140 late model wiring diagram help

[GroverIH]

I have an IH 140 sn 64118 and am in need of a wiring diagram for the lights, specifically the fender mounted flashers and trailer plug. I’m missing the harness for the fender lights. My harness has wires that run to the trailer plug. Also if someone has the wiring schematic for the turn signal/ flasher switch that would be helpful. I don’t know if it’s wired correctly. I have the front and rear running/working lights working properly.

 

[Absent Minded Farmer]

I have an IH 140 sn 64118 and am in need of a wiring diagram for the lights, specifically the fender mounted flashers and trailer plug. I’m missing the harness for the fender lights. My harness has wires that run to the trailer plug. Also if someone has the wiring schematic for the turn signal/ flasher switch that would be helpful. I don’t know if it’s wired correctly. I have the front and rear running/working lights working properly.

Try the link below. ↓

It should take you to Messick's parts diagram page for the 140. It's set for the diagram for the serial number range of 26801 - 45000. It is not the exact one for your tractor, by serial number, but it's a start & you can poke around the diagram list & see if the one for 45000 & up is listed there.

Mike

140 Parts Diagram....

 

[GroverIH]

My tractor is 2 revisions after that set of serial numbers so electrical is not applicable.