When i purchased this tractor,and got it home,it ran like a champ.I got a stupid idea to put a tablespoon of seafoam in the tank.A couple days later ,the tractor was not working right.It was serching,like starved for gas.I could fiddle and adjust the carb,get it idling and working for a half hour,and then it would start skipping and serching.
Its not the governor,for it worked great when i bought it.
I put a new carb kit on it,two washers under the needle,and it ran pretty well...for a day or so,now back to stumbling,skip,poping through carb. I tested the gas flow through the line,it poured out.The other day i seen gas seeping out through the intake gasket of carb,,and was kinda pulsating a tiny bit of gas when the tractor was running,,as though it was flooding. I did install 2 washers under the needle,,can i put three? to lower the float more?
Im to my wits end. Cant understand why this tractor all of a sudden decided to work crappy when i had it a couple days! I put a new needle in,,not much differance,cleaned and blew out all the jets,carb was clean anyway.The darn carb kits gaskets were thinner than the origional.Should i install the origionals?
ok....thats enough to think on . BTW,the new kit came with a different butterfly flap,,mine was very beat out and loose.This one is tight,but not closing all the way,,a very tiny gap around it in the chamber, My old one was round,this new one is kinda oval....i ruined my old one taking it out.
Its not the governor,for it worked great when i bought it.
I put a new carb kit on it,two washers under the needle,and it ran pretty well...for a day or so,now back to stumbling,skip,poping through carb. I tested the gas flow through the line,it poured out.The other day i seen gas seeping out through the intake gasket of carb,,and was kinda pulsating a tiny bit of gas when the tractor was running,,as though it was flooding. I did install 2 washers under the needle,,can i put three? to lower the float more?
Im to my wits end. Cant understand why this tractor all of a sudden decided to work crappy when i had it a couple days! I put a new needle in,,not much differance,cleaned and blew out all the jets,carb was clean anyway.The darn carb kits gaskets were thinner than the origional.Should i install the origionals?
ok....thats enough to think on . BTW,the new kit came with a different butterfly flap,,mine was very beat out and loose.This one is tight,but not closing all the way,,a very tiny gap around it in the chamber, My old one was round,this new one is kinda oval....i ruined my old one taking it out.