Rubber strips for steel wheels

[Lonshell]

I want to put rubber bands (strips) on the front and rear steel wheels of my 1929 John Deere D. I have a road bands on lugs of rears and want to leave lugs and bands. Bands are 3 inches wide, probably could bolt rubber on using carriage bolts?
Assume 1/2 inches wide thick by 3 inches wide rubber strip
On Front I would like to use thick approx 2 inches thick and 2 inches wide for rib replacing angle iron rib. Any advice? Sources of hard rubber for bands on steel wheels?

 

[Ray,IN]

You'd have to make them to suit you, but consider used conveyor belting from a coal mine or stone quarry. It's 3/8" thick though.

 

[Lonshell]

Thanks Ray. Old belt 3/8 thick would work on rear wheel bands. Do you have a source for thick hard rubber 2 or more thick I can use on front for ribs in place of angle iron rib? If I put 3/8 rubber on front tractor is pitched and does not look good. My lugs on rear are rice land A and makes rear of tractor to be high