Anyone else cant turn their head to see behind the tractor?

OMG! I thought I was the only one. Same as you, I stand up and I figure it's only a matter of time before I slip,fall and get ran over. I;m not sure why I had never considered it before but while watching the wife's back-up camera a few days ago I got the idea of putting one on my tractor.
 
Not yet, but the day is coming.

I have mirrors on the Cabota and back up cameras in the truck and the RAV4. My problem is that I find the reversed (mirror...arrrr) image disorienting. On the tractor - usually when mowing - if I spot something in the mirrors that piques my curiosity, I turn around and use the Mark I eyeball to check it out. Backing for any distance involves looking as well.

I do find the "range markers" on the cameras handy when trying to snuggle up to something.
 
Those magnetic mount mirrors that you can buy from Amazon are quite handy. Reasonably priced and stay where they're put. I bought two for my side by side and liked them so well, I bought another set and put one on each of my mowing tractors. Just search for "magnetic mirror" and you'll find them.
 
Same problem here. Add on not so good eye sight when backing up. I can't tell where a hitch is lining up until I'm about 3 ft from it and every time what then looks like a good line up from the seat is off about a foot. My fix is to buy enough tractors I don't have to back up to an implement any more.
 
It's not getting any easier! I have found if you keep your neck warm it's better, one time I got pretty cold and the next day I couldn't turn my head much at all.
 
Last edited:
Best to do the stretching before putting in reverse. Put you foot on the clutch and push it in, turn your body on the seat as far as needed to see the drawbar or what your backing up to. If you stretchi it all out first, it becomes a lot easier actually doing it.
 
I have lately been shifting myself a few degrees around to my right on the seat, with my hand on the backside of the ROPS. It has been working well.
 
When backing I need to idle down, and stand up to see what is going on behind my tractor. I hung a mirror on the ROPS, which helps, but not much. How do some of you see what is going on behind your tractor? Stan
I put a 2 camera system from amazon on my 4020 and 148 loader. It is a wired system. It works well, but I need to cut power to it or it drains the battery. The on/off switch does not stop this from happening. They are on magnetic bases, so they can be moved or swiveled when needed. The front camera is used to help line up euro style mountings for bucket, pallet forks, or whatever. I am happy with how this setup.
For decades my neck would hurt for a couple of days when field work started.
 
When backing I need to idle down, and stand up to see what is going on behind my tractor. I hung a mirror on the ROPS, which helps, but not much. How do some of you see what is going on behind your tractor? Stan
I have been there for a few years. I don't remember the exact time it started. Hooking up three point implements is where I first noticed it first. I would put the 5020's in low range at idle and stand on the foot rest where I could see when both pins were close and one would enter. With one cliped in I would move the tractor to where the other pin would enter by adjusting the three point with the crank. All that worked fine until I could not get back on the tractor.
 
Same problem here. Add on not so good eye sight when backing up. I can't tell where a hitch is lining up until I'm about 3 ft from it and every time what then looks like a good line up from the seat is off about a foot. My fix is to buy enough tractors I don't have to back up to an implement any more.
Not having to change implements is the reason I now have 7 dedicated tractors, all older except my "handyman" 25 HP buddy being a 2021 Hydro. The Hydro is a dream when needing to make a few "tweaks" in making a hookup. A lot of times when I do have to change implements, the handyman helps me make the connection.
 
Yep, my C-3,4 and 5 are bolted together and the other month had a shot in my C2 as it’s causing problems. I need to have the boys back something’s up and hook as I just can’t. This winter going to look at cameras for a few bigger tractors to help out. My trucks are set up that way already.
 
Yep, my C-3,4 and 5 are bolted together and the other month had a shot in my C2 as it’s causing problems. I need to have the boys back something’s up and hook as I just can’t. This winter going to look at cameras for a few bigger tractors to help out. My trucks are set up that way already.
Hooking up the trailer is another challenge for me. It takes at least six tries to get close to the ball, then if not careful I knock the trailer hitch off the blocks. A camera would sure be nice, but I will probably quit mowing in a few years. At 84 it is getting close to quitting time. Stan
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top