DC-4 a little light on the front end

chuck machinist

Well-known Member
Operated a great day at BONNEY BRIGHT PLOW DAY this week end, Running a BER 3/16 Plow, with 600 lbs on the DC-4 , no liquid ballast. Running the heart shaped front weight now. Suit case weights just aft of the radiator perhaps? 14 psi in rear tires She was dyno tested 3 weeks ago at 45hp. 4 1/6 pistons CM
382976672_10210527705744702_1146216193204250365_n.jpg
 
Sort of. It was carefully maintained by Gary Heuertz of Ankeny Iowa. He is like a brother to me. The DC-4 has helped me gain the respect that Case deserved here on the East Coast.. We had a tired DC-3 on the farm in Whiteside County in Illinois. A 2 bottom plow , [JD14T} Baler , Drag implement tractor, and an occasional hay Mow Tractor. CM
 
Chuck, was Gary at one point Mayor of Polk City? I vaguely recall that being his last name, If its him I met him years ago at pull somewhere in iowa that he attended with a friend from between ankeny and Elkhart that pulled a 210 Allis.
 
It wouldn’t surprise me! Quite a personable fellow. Here is a picture of he and I during a period when human contact was discouraged, making the deal. I hope you can see the humor in this picture.I owe him a call thank you.CM
 

Attachments

  • IMG_0749.jpeg
    IMG_0749.jpeg
    4.1 MB · Views: 0
Last edited:
sure looks like him! been a lot of years since I've seen him, he had a really low serial number F20 farmall he got from a buddy as well. that would make a small world if it is him.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top