Any easy way to remove old grease??

Brian Ski

Member
This old Farmall H has grease built up on the front wheels and underbody. The grease is so old and dry it is like concrete. I tried some scraping but it is quite tough. Was thinking of leaving it for my Son to mess with. If he wants too.
 
Actually, there is a lot of ways, power wash 2-3 times, scape & spay degreaser, 4"inch wire wheel wear welding gloves & helmet with face shield. The oil & grease threw time dries with field dust and gets pretty tough. It's all part of that great world of working on restoring tractors.

I have a 1940 H in the shop right now and it's has been the worst for old grease build up, doing some mechanical repairs before painting.
 

Attachments

  • IMG_0829[1].JPG
    IMG_0829[1].JPG
    2.1 MB · Views: 0
  • 1940 repairs.jpg
    1940 repairs.jpg
    2.6 MB · Views: 0
  • IMG_0201.JPG
    IMG_0201.JPG
    3.5 MB · Views: 0
Some pressure washer pumps will not tolerate hot water.
I hate to use cold water... I looked and mine was rated for up to 122F. I looked around and found a thermostatic valve for $25. You hook it to hot and cold, then dial in the temp. Will give it a try to keep it within the temp range. That should make the hot water last longer too. Better than using 55 degree water.... Thanks
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top