-
J
Single action cylinders
I put three point hitch on the mast from an electric forklift and am using it on a 424 international. I don"t have enough hydraulic capacity to make the mast go all the way up and really don"t like the way the pump goes up against the bypass when the mast is coming down. I was considering adding...- jfloyd
- Thread
- Replies: 4
- Forum: Tractor & Farm Talk
-
J
424 international oil pressure
Does anyone know how much pressure it takes to hold off the factory idiot light? Is this port the full pressure of the pump? I removed the sending unitand put a gauge on this port. I see 22# cold and next to none idling hot. I see another plug on the filter housing but haven"t tried it. What...- jfloyd
- Thread
- Replies: 4
- Forum: Tractor & Farm Talk
-
J
424 rear main bearing
There is a little plate that blocks access to the rear main bearing bolts. Does anyone know how this comes out before I pry too hard on it? I"m worried that it may bolt from the flywheel side and the tractor would have to be broken to do this and to change the rear seal. Also, if anyone has the...- jfloyd
- Thread
- Replies: 4
- Forum: Farmall, International & McCormick
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy