(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. R

    Are M and c175 lifters interchangeable?

    Folks, I am rebuilding a couple of the utilities (A 300U and a 350U) and several of my lifters look very rough. They are either pitted deeply on the base, or have enough wear on the sides that the lifter is a bit loose in the engine bore. I am aware that the h lifters would work, but I found...
  2. R

    Motor machine shop advice- Lubbock to Springfield

    Fellow tractor folks, I drive regularly between West Texas and Southwest Missouri, and need to locate a motor machine shop somewhere along my path that will take on a project. I have a c-169 IH block, counterbored for dry type liners and I will need the following; * Bore, then install repair...
  3. R

    169c.i.d. I.H. engine in Joy air compressor

    Folks, I just drug in a Joy Brand 150 cfm compressor with a 169 c.i. 4 cylinder I.H. engine, as far as I can puzzle out the same as a Scout 800 engine. Other than blowing out the dust and critter nests, I haven't started in on it, but am sure I will be into the motor some. The distributor (It...
  4. R

    300U/ 350U FH Carryall

    Hello all, I am making a carryall for my utilities, and after reviewing the existing posts and the OEM IH pictures, came away with one question- How much depth front to back would be useful before it becomes cumbersome and unhandy? I will make it 72" wide,and was thinking of 48" between the...
  5. R

    H and 300U/350U Camshaft?

    Folks, I am looking around for a camshaft for my old c175. According to my book the camshaft with a key is a 49900ddx. I can find plenty of good used H camshafts inexpensively, but the used cams that are out of a 300 and 350 are always priced higher. Can anyone tell me with certainty whether...
  6. R

    350 lp head valve search

    Hello folks, I have a 350U on lp head in the machine shop (Head casting #364017R2), and the machinist recommends all new valves. I looked at the valves and he is right, they are really thin. Do any of you know of a source for these? My book shows the proper valves for an LP head is 363786r1...
  7. R

    c169 head studs, trying again

    Well that was interesting. Posted this last night and the entirety of the text disappeared. I tried to make this as short as possible, but there is a lot to relate... Trying again- I recently purchased a 300u on gasoline that looked to be all original, but supposedly has "A busted block"...
  8. R

    c169 head studs epic battle

    I have been tearing into a c169 in a 300 utility. It was sold to me as having a "busted block". The first thing I did was yank the head and get it (the cylinder head) into a trusted machine shop. No cracks or breaks. The engine has three (yes, really)different types of pistons in it, and...
  9. R

    Turf Tires on 300u/ 350u?

    Folks, I have been running foamed lug (R1) tires on my 300u, and am about ready to purchase a second set of tires, this time for my 350U. I have been using my 350u for mowing grass (Not brush hogging, actually pulling a finish mower) and it is noticeably rutting the place. The 350u presently...
  10. R

    380LL Rear final drive seals

    Folks, I am helping a friend with a Case/ David Brown 380LL. This tractor had broken the transmission housing, and my friend was able to locate a replacement that wasn't broken nearly as bad. It looks to me like the force of running a loader bucket into a pile of material breaks the housing...
  11. R

    350 utility lp head/ pistons

    Folks, as we are about to head into winter, I am considering pulling down my 350 utility for overhaul. I have a running tractor and a parts tractor, both were originally 350 utility LP's. The parts tractor was "converted" long ago to gasoline(Very crudely), and the side of the block was very...
  12. R

    Massey 65 lp questions

    Hello folks, I am regular over on the IH forum, but was hoping to get some help for a friend who has his nose oils on a Massey 65 on LP. We are going to look at the tractor tonight so any hints or tips would really be appreciated. He is a machinist and I ran a heavy equipment shop for years so...
  13. R

    300/ 350 Utility fast hitch questions

    Binder folks, First of all, Thanks for the recent answers on my rainwater in tractor questions. Now for the question of the day. I run two Utilities, a 300 on gasoline and a 350 on LP. Both have fast hitch with the Draft control option, using a vertically oriented cylinder. With the 300 I...
  14. R

    A different sort of Rainwater problem (IH utility)

    Guys, I have a puzzling (to me, that is) issue with rain water in a Brother and Sister pair of IH utilities. Sadly, I don't have a shed so both of these tractors live al fresco. One (300U with T/A on gas) in Southwest Missouri where it rains fairly often, and one in West Texas(350U with T/A on...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top