Search results

  1. J

    8n with too much axel preload

    I have a 48 8n that has been in my family for 40 years. I am replacing the brakes and plan on fixing the oil leak into the brakes. I pulled the left axel from the shaft and posted pictures of the differential end of the axel. Does this look like normal ware or was there not enough shims...
  2. J

    8n air bubbles in hydraulic oil, weak hydraulics

    The hydraulics on my 1948 8n does not build enough pressure to lift an older, heavy bush hog on its own. If I assist it will raise the bush hog to the top of the cylinder travel. When I shut the tractor off with the bush hog lifted up it will stay in the air for over 2 days. The tractor has...
  3. J

    8N - Governor With 3/4" Ball Bearings

    I bought a governor off eBay to replace a poorly made new governor that does not provide enough force to counter the spring on the linkage. This governor off eBay looks like an early 8N governor without the port for the proof meter except that it has 3/4 ball bearings instead of 5/8. I did not...
  4. J

    6V to 12V Keeping Pertronix 6V Positive Ground

    I have a early 8N . It has a Pertronix 1244AP6 6V positive ground ignition connected like the in the image. My generator needs replaced/rebuilt and I am considering upgrading to 12V. If I convert to a 12V negative ground and add a 12V to 6V voltage reducer between the ignition switch and the...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top