(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. M

    Brakes on a MF 35

    Take em apart and have a look see, you don't want be caught off guard on a tractor with brake failure.
  2. M

    MHF Model 50 hydraulic pump

    I have seen in several cases where parts are made for these machines as they get even older due yo demand. All in all the MF50 is pretty easy to get parts for, Massey used a lot of part from other models that are used in the MF 50....Good luck.
  3. M

    MF 50 Clutch Pedal pivot bushing

    For that I would start with my local Massey dealer. How much could it be 200 bucks, naa just kidding but that would be where I would go.
  4. M

    Trying to figure out an unknown lever

    when you own a tractor old or new its a really good idea to have a shop manual and operators manual, wont set you back much and will make you feel really smart.
  5. M

    DavidP, I need your help...

    The only reason I can see for you wanting to know what kind of seal you have is because its leaking. Then why not just rip it apart and see for yourself, rubber, rope or chicken feathers its gotta be changed right. Then when you get it apart just go and get ya one and throw it on in. It's all...
  6. M

    51 MH 30 removing rear rim

    lube it up with some penetrating oil, then try the big hammer again.
  7. M

    51 MH 30 removing rear rim

    you removing the rear wheel? If so remove the lugs and wallop it with a sledge if its stuck. Unless im missing something here?
  8. M

    1957 Massey 50 Surge

    I would buy a carb rebuild kit for less than 40 bucks and replace needle, needle seat, float etc and see what happens. I would look at Gov by disconnecting linkage or just checking operation while some throttles up for you too. Sounds lie a sticky carb component and easy to do/fix.
  9. M

    Z-134 oil pressure

    its not a tired old engine, thats normal for the z134.
  10. M

    Identifing MF model and year

    well I just gazed into my crystal ball and it looks like your tractor is a massey workbull...dude we need info, pics, numbers or something.
  11. M

    MF 135 - Hydraulic Hookup for Bush Hog Freeman 3000 Loader

    Yes and as stick welder mentioned you need a selector valve which is bolted to that cover once removed, that switches pressure from your 3pt to your loader plumbing..almost forgot about that, its been a long time and spindle valves which bolt direct to the cover have that selector built in..but...
  12. M

    MF 135 - Hydraulic Hookup for Bush Hog Freeman 3000 Loader

    might be, or they might just be ports to return fluid, pressurized fluid comes from your pump right up to that plate with the 2 bolts, theres also a return port under that plate. start your machine and crack the other ports slightly and see if fluid comes out under pressure. How many hoses do...
  13. M

    MF 135 - Hydraulic Hookup for Bush Hog Freeman 3000 Loader

    that plate with the 2 bolts in it right over the elbow on that line has to be remove and you bolt your controls right to that(spindle valves)then run all you lines of course. not sure if the controls came with the loader but if the didn't just google massey spindle valves/controls and you should...
  14. M

    Massey Ferguson 50 no compression

    Bring the cyl to top dead center and shoot some regulated shop air into the plug hole, If you hear hissing at the tail pipe=ex valve, you hear it coming up thru carb=intake valve, you hear it coming out the oil filler=rings. you can also pull the head and look at the valves and turn the motor by...
  15. M

    Massey Ferguson 50 shuts off when idling down

    Yea all those snake oil additives are a waste of money anyway, gotta agree with Tony....
  16. M

    Massey Ferguson 50 shuts off when idling down

    sounds like fuel delivery. I would start by pulling the carb removing the bowl, check the needle valve and float and valve seat, and just for the hell of it buy a carb kit for 25 bucks or so and replace those parts. Put it back together and make your adjustments.
  17. M

    MF35 gear crunch with 2 stage clutch

    do what Masseynut said....and bring down your rpm's when doing so.
  18. M

    Late 63' MF 202

    yes that manual would cover the 202. they (IT manuals)are pretty good but do leave things out...
  19. M

    Late 63' MF 202

    you should try and simplify your questions for better responses, I read your post twice and am not really sure of what your asking, Hey we are only lowly tractor mechanics here....
  20. M

    massey 50 with scoop...

    hey guys, when using my Massey 50 with a rear King Kutter dirt scoop, how do I put downward pressure on the 3 point to use the scoop to dig soil?? It just seems to float along the surface.
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top