(800) 853-2651
SHOP NOW

Search results

  1. J

    950/990 brakes/Agco parrt #

    The splined center brake disc assemblies are not available from Agco any longer. They supersede the part number 7AS2603A to a qty. of two, 7A2604AV linings and a qty. of 18, 7A2605 rivets and you would have to reuse the center, splined part of your old disc. This would repair one brake disc...
  2. J

    1650-1950 gasket

    No, they are not. The part number for the 1650 hydraulic pan gasket is 160405A and for the 1950 hydraulic pan gasket, it is 103836A. It would require two of them per tractor.
  3. J

    Throttle stop pin on 1800's USX-029 Carb

    The size of the spring pin is 3/16" Dia. x 3/4" long. This was obtained by a cross reference from part number H7633 to an old Oliver cross reference of 933184, of which we have a hardware listing for.
  4. J

    Needed: Oliver 1850 LP Carb, and Regulator Parts Breakdown

    The requested pages have been sent to your email address.
  5. J

    Does anybody have a parts diagram for Mallory Distributor?

    Send me an email at jhelt?mcfarlanes.net, substituting @ for ? and I can send you an email attachment that has the parts listing and service specifications for both model Mallory distributors that have been used on Oliver and White tractors.
  6. J

    2-180 Over Under rear housing

    John, The parts book does call for an 1/8" x 6" ID O-ring, part number 941685, replaced by 70923594, for the location where the overdrive housing mounts to the main case of the Over/Under. Where this housing seals to the trunnion mount of the transmission, they call for a part number 941686...
  7. J

    White/Oliver Plow Frog Part Number

    The part number you need should be 30-1012711 and still shows to be available with Agco.
  8. J

    2255 Oliver Speedometer

    The part number for an 1855 2wd tractor is 168928A which is replaced by 72500500 and this is available from Agco. The part number for an 1855 with 4wd bevel pinion shaft and cover is 159453A and this is discontinued by Agco. The part number for a 2255 tractor is 30-3083586 and this part number...
  9. J

    SUPER 55 PTO SHAFT INTERNAL NEEDLE BEARINGS

    Yes, this is correct although there is another needle bearing that is actually the rear bearing for the countershaft to run inside of. Replacement of these bearings would probably involve a teardown of the complete transmission, the way the shop manual reads. Information on this has been...
  10. J

    Parts List for model 100 Plow Stone Hitch

    We have misplaced our parts manual for a model 100 Oliver plow. We are looking for the parts breakdown for the stone hitch that was supplied with this plow, also sometimes known as a Holland hitch, named after the manufacturer of the hitch. I believe that some of the part numbers will start...
  11. J

    Ford '72 3500 loader/hoe

    New Holland's Powerview parts catalog lists the brake shoe part number for a 1972 3500 Ford tractor as 86531521. This replaced part number C7NN2218A. As your tractor is supposedly from 1972, this should be correct for your tractor and shoe number 86531521 is available at New Holland dealers...
  12. J

    SUPER 55 PTO SHAFT INTERNAL NEEDLE BEARINGS

    Refer to my post directly under your first one for information you can use.
  13. J

    SUPER 55 PTO SHAFT INTERNAL NEEDLE BEARINGS

    Shewelt: Send me an email address at jhelt?mcfarlanes.net, substituting @ for ?, and I can send you some pages from the Oliver shop manual in a PDF format that shows the differences in the early Super 55 vs. later Super 55 PTO's. These pages also explain how to repair the PTO. The Ag...
  14. J

    SUPER 55 PTO INTERNAL Shaft SEAL

    Forgot to mention that item 37 is on page D30 of the Super 55 Oliver tractor parts listing.
  15. J

    SUPER 55 PTO INTERNAL Shaft SEAL

    The seal you are referring to is item #37 of the Super 55 Oliver tractor parts list on agcopartsbooks.com. It is the same as Oliver part number 100545A. Notice that there are two different seals listed for this location due to a serial number break. I am not familiar with whatever is in your...
  16. J

    steering motor 1655

    In the center of the steering shaft, you should see either a 3/8" nut, (9/16" wrench size), which goes on a threaded shaft sticking out of the bigger shaft that the steering wheel nut threads on to or a solid shaft that you would push on which would be spring loaded, again which would be in the...
  17. J

    steering motor 1655

    That pedal tilts the steering wheel but doesn't telescope it. Check to see if you have the chrome knob or push button and reply.
  18. J

    steering motor 1655

    A saginaw steering unit will have a chrome knob on the top of the steering wheel that you twist to loosen and telescope the wheel up or down if it is not frozen up. The Char-Lynn style will have a push button in the center of the steering wheel cap that you push in to telescope the steering wheel.
  19. J

    1750 fuel shut off cable

    You would need part number 106051A, stop cable 67" long, which would be available at most any Agco dealer or check with an auto parts store or farm store that would carry choke cables in this length.
  20. J

    Oliver 660 Hydraulics

    You should be able to add a breather to the rod end of any double acting cylinder to enable it to work as a single acting cylinder so that you don't even need to replumb anything. Most any farm store should have these on-hand in either 3/8" or 1/2" pipe thread sizes for around $10.00 each.
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top