(800) 853-2651
SHOP NOW

Search results

  1. D

    Propane tank fill valve gasket

    My son is trying to fill a horizontal 25 gallon propane tank. They started the fill and found a leak at the gasket between the tank and fill neck. A Web search didn't reveal anything; what is this gasket called and where might we find one?
  2. D

    CA hand clutch lever

    My CA is missing the hand clutch lever and retaining bolt. Does anyone have one from a parts tractor? What is the thread of the retaining bolt; looks like it might be 9/16-18? My email is open if you have the parts you would like to sell. Thanks, Tim
  3. D

    Single acting cylinder

    The lift cylinder on my IH 3309 discbine leaks and sprays fluid. It appears to be coming from this fitting at the base though I haven't seen it happen, given the location. What does this fitting do and could it be the source of my leak?
  4. D

    Case-IH 3309 discbine u-joints

    I was greasing my 3309 discbine (same as a New Idea 5209) this morning and noticed a bit of slop in one of the u-joints that drives the upper conditioner roller. I looked on Messicks website and it appears that they do not sell the u-joint independently of the assembly. At 160 bucks each, I...
  5. D

    Whats this?

    These slugs are 1/4 inch diameter and an inch long. I find them when walking in the city street. The spline seems like it is part of a drive mechanism. Is this part of a concrete anchor?
  6. D

    Hazelnut harvest

    Neighbor called and said its time to pick my hazelnuts. We have been bone dry but heavy rains are coming so it was time to get what we can. I ran the sweeper and that is the dustiest job on the planet.I think 15% of the nuts are still in the trees and the storms should knock them down, but the...
  7. D

    Duetz fuel pump

    Neighbor has a hazelnut sweeper with an older Deutz diesel engine and he needs a replacement high pressure fuel pump. Anybody have any leads on where to find one?
  8. D

    7.4 oil cooler lines

    I am putting a new radiator in the farm truck; 1995 GMC 1 ton with 7.4 gasser and 5 speed transmission. The new radiator has ports for a transmission cooler which I don't need and on the drivers side are ports for a engine oil cooler. There were no lines installed in the old radiator, just a...
  9. D

    Heavy duty fenders

    I was looking around a salvage yard in Central MN and came across this 4500. No need for rear weights with those fenders. Few Fords on the lot but fun to wander around.
  10. D

    7600 hydraulic filter

    Im replacing the external spin-on filter on my 7600 while replacing the hydraulic pump. This tractor was neglected when I bought it and I changed the hydraulic fluid and used a WIX 51208 filter since that was what was installed. I went to pick one up today and they had no stock so he looked for...
  11. D

    GMC 2500 blower fan

    The blower fan on my 2003 GMC Sierra works in the 3-4-5 positions only. 1-2 I feel no air movement. Is that the switch or the motor? I believe that if the motor works, it works and the speed is controlled by the variable resistance in the switch positions. So my analysis is that the switch...
  12. D

    Ford 5000=Long 460 dimension?

    I don't know Long tractors at all, but there is a quik-tatch loader for sale mounted on a Long 460 and the seller thinks it will bolt on to a 5000. Price is cheap, but I'm wondering how much work to bolt that frame to my 5000.
  13. D

    Auxiliary control valve on 5000

    I have a 5000 SOS with two sets of remotes. I was flailing the orchard with a 3 pt mounted mower and when I finished I lifted the mower to cross the bridge. On the other side, I attempted to lower the mower to mow the lane back to the house but it would not drop when I lowered the lift...
  14. D

    CA fuel shut-off

    I replaced the fuel shut off assembly a couple years ago. I turn off the fuel when I park it. Last time I went to start it, fuel leaks profusely around the shaft. Is there a packing or o-ring I'm missing?
  15. D

    3-M sheep Loader manual

    3M, I just found an old reply to a post you made regarding an EZee On 2060 loader. I do have the manual I can send by email. I would love to see pictures of your mount. Send me an email DC
  16. D

    Ezee On loader

    This message is a reply to an archived post by 3msheep on March 26, 2021 at 09:13:10. The original subject was Re: Ezee On loader. I just went back and re-visited this after a year. Yes I have the manual I can send you. I would love to see some pictures of your mount. My email is open if you...
  17. D

    John Deere 4020

    I was at a retired dairy the other day and there was a 4020 with a loader sitting there needing some TLC. It got me wondering how many hours of work 4020's have done across the country? It has to be a huge number. 4020 with a Powershift was my first experience driving a big tractor as a 15...
  18. D

    How to flatten rolled gasket sheet stock?

    I have a friend who can cut gaskets with a laser and I need to flatten the material so it will lay on the bed of the machine. I bought a roll of FelPro material 1/32 thick, so how can I get it to lay flat? An iron? Two flat surfaces with weight? The gaskets he is cutting are roughly 4 x 5.
  19. D

    Phase converter update

    I did not find a fuse inside the box and there's plenty of char. The replacement my buddy bought is a Cedarburg unit rated for 3-5 hp. What I do not understand is the original Phase O Matic unit says on the label it is intended to RUN a 3 phase motor on single phase and the new unit says it...
  20. D

    Phase converter gave up

    I have a Bridgeport mill with a 1.5 hp 3 phase motor. When I bought it it came with a Phase-O-Matic converter rated for 3/4-1.5 hp. It has worked fine for me. Today a friend was using it while I was at work and he was drilling some tiny holes so he had the RPM set high on the vari-drive...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top