-
Sunday Stripper
No, not that sort. This one was invented by Headley Taylor in Australia, He and H. V. McHay pioneered the idea for just removing the heads of crops like wheat, back at the end of the 1800's. McHay was a farmers son who went into machinery manufacture, building and expanding his initial design...- Majorman
- Post #1
- Forum: Community Features
-
C
Tw35 oil pressure
A friend of mine has a tw35. When he changes the engine oil it acts like it looses its prime. He fills the filters before installing them. It takes a long time to build oil pressure when starting after the oil change. Over a minute, not just seconds. After that it has oil pressure instantly...- counterclockwise
- Post #1
- Forum: Ford
-
R
Ford 3000 axle make popping noise
Its the wheel adjusters. They have a 3/4" clean spot where the were sliding -
R
Ford 3000 axle make popping noise
I didnt think to check that. Looks like I need to re-torque everything I can get to when I get over the sore back. I was worried about having to change out the axle with loaded tires and figured I would do a little homework before I tore into it... work smarter, not harder kinda thing -
R
Ford 3000 axle make popping noise
I didnt put a wrench on the lugs. They dont look loose, no shiny metal from sloppy lug nuts. After a full day of moving dirt, I didnt feel like crawling around on the ground to check it out -
R
Ford 3000 axle make popping noise
I was using the Ford 3000 with FEL this weekend. After a few hours of digging gumbo, the right axle started making a popping/ clicking noise on a hard push. It sounds like it is coming from the wheel/ axle area. I wasnt ramming it, just slow steady pushing in 2l and 3/4 throttle. It pops... -
R
Rare diesel tractor for sale.
that is rare if it is a "naturally aspirated" diesel. 68+ and pretty oil/dirt/mud caked for a diesel. Looks like no maintenance (or cleaning) has been done for quite a long time. I wouldnt trust the injector pump It has probably never seen a shed, but it does have a new seat! $4000 is... -
R
silverado add pulling out stuck ford tractor?
Kinda like the V agra add where the guy in a 4WD truck pulling a trailer through a mud hole in 2WD gets it stuck instead of driving around it or putting it in 4WD, the guy in the desert buying a $8 bottle of water at a gas station instead of a gallon of antifreeze, the guy that looks like a hero... -
R
ford 3000 gas tractor bad miss at all rpm
self threadjack... I checked the oil on this after I got it running good and found it to be about a quart over full, before that , I didnt pay that much attention to it. It was way up on the stick and looked dirty, so I was gonna change it any way. I drained it out and it smelled a little like... -
R
Stuck top link bracket pin
homebrew grape juice (50/50 acetone/ atf). heat it with a propane torch, spray the juice to it, drink a beer, then smack it with a hammer. If that doesnt work, it is too bent to come out. You will have to grab the sawsall. -
R
Ford 4000 select a speed
Sorry for the threadjack.. 5000 SOS runs good, bad tranny, $1600 Which way do I run? -
R
ford 3000 gas tractor bad miss at all rpm
The carb for a 158 ci "2000" is on and runs like a top. I had to pay shipping 3 ways to get the right carb. I will discuss this with the b tch line on friday. I am dealing with the Chinese fuel cap that turns but wont come off now. I will pay extra for real parts from CNH after this... -
R
ford 3000 gas tractor bad miss at all rpm
now I get an email 6 hours later and the jackwagon says he needs a cc number to process the order for the new carb. I have a sneaky feeling this is far from over -
R
ford 3000 gas tractor bad miss at all rpm
Just got off the phone with CS. No problems with the return (other than them not admitting that the website was wrong). New carb is on the way but I'm out the money for 2 carbs until they get the new one back. Waiting on bucket cylinder seals for the loader, but other than that , this thing... -
R
ford 3000 gas tractor bad miss at all rpm
I contacted zenith and the main jet should be C52-36-25.5 for a carb for a 158 engine. Not having any luck finding that on the net. Waiting for the YTC b tch line to open so I can see what my options are. I still have the box but it has been in the dumpster for a week ( I dont think they want... -
R
ford 3000 gas tractor bad miss at all rpm
Exactly. So why would a parts supply house that specializes in replacement parts for 50+ year old tractors, list this carb to fit a 175 engine in a 3000. I have lost a week and who knows how many hours fighting this, not to mention buying another $100 worth of parts and a $45 timing light to... -
R
Got Jack Stands?
dont trust the bumper jacks! My neighbor had the back end of a '49 ford up on 2 bumper jacks to put shackles on the springs when they fell over pinning his head between the tire and fender. I had to drive him to the horsepiddle to get 12 stitches in his face after picking up the car to get his... -
R
ford 3000 gas tractor bad miss at all rpm
I put the old crusty carb back on without rebuilding it. Had to run 3/4 choke, but it ran fine. Everything else = good... new carb = junk. thanks YTC!!! 50% of the stuff I have bought from this site was the wrong part, didnt fit or poor quality. this $325 carb will be going back in the... -
R
ford 3000 gas tractor bad miss at all rpm
I bought the timing light to day. timing was adjusted to 3 btdc @ 475 rpm with vac advance removed. That was dead in the middle of the adjustment slot for the dist. It runs the same. I picked up some fuel line to hook up the old carb after I get the bowl sealed. anyone know the jet size that...
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy