(800) 853-2651
SHOP NOW

Search results

  1. J

    Leaking Pond

    I have a pond that is about 1 acre+or-, last year we removed one dead and several live willow trees with an excavator, pulled the root balls out, pulld dirt from the pond and smoothed over the holes. The reason for removal was that I had noticed a wet spot below the levy downhill from the dead...
  2. J

    Dieseltech 2810

    I asked last week about my 2810 that was running fine, shut it off momentarily and wouldn't restart without starting fluid. You thought it was probably the hydraulic head worn. Day before yesterday I tried it and it started and ran fine like it always has. Used it yesterday to spread 45 tons of...
  3. J

    Dieseltech 2810 Problem

    2810 diesel has been running fine, been using a box blade working on the driveway to the new shop, was spreading sand and uncovered a small snake, stopped and shut the engine down to check out the snake. He was dead so I got back on the tractor and it would not start, turns over fine, checked...
  4. J

    Wore Out

    Thanks for the Standard Ignition part #SS-580 for the 841 solenoid. O'riellys ordered one for me and it worked perfectly.
    • JWA
    • Thread
    • Replies: 2
    • Forum: Ford
  5. J

    841 Solenoid Follow Up

    Spoke with YT about solenoid problem, turns out that their middle man supplier was crossing their part number over to the incorrect solenoid. Long story short, they do not have a solenoid with an insulated ground, refunded my money and told me to keep the incorrect one that they had sent me. I...
    • JWA
    • Thread
    • Replies: 1
    • Forum: Ford
  6. J

    841 Solenoid Operation

    Help me understand the operation of the starter solenoid on my 841. It is my understanding that when the transmission mounted starter switch is depressed its function is to ground the actuation coil in the solenoid switch and completing the circuit to send power to the starter motor and turning...
    • JWA
    • Thread
    • Replies: 5
    • Forum: Ford
  7. J

    841 Solenoid Operation

    Help me understand the operation of the starter solenoid on my 841. It is my understanding that when the transmission mounted starter switch is depressed its function is to ground the actuation coil in the solenoid switch and completing the circuit to send power to the starter motor and...
  8. J

    HP Requirement

    Is there a rule of thumb on HP required per Foot of bush hog/rotary cutter?
  9. J

    Heart Cath Follow Up

    No blockages found. They are scheduling a cardiac ablation in a few days to correct the irregular heart beat. Good news, the bad is that the garden is loaded down and no way the wife can keep up with it. He told me to stay away from it until he gets the heart beat straightened out.
  10. J

    Heart Cath

    Heart cath this morning. I have afib,and am short of breath all the time. Hope he can figure it out.
  11. J

    DESTROKED450 ULTRADOGMN

    Thanks for the help, I got the 10si conversion done today.It went without a hitch and works perfectly.
    • JWA
    • Thread
    • Replies: 4
    • Forum: Ford
  12. J

    Alternator Conversion

    Anybody got a wiring diagram for replacing the generator on a 3000 Ford diesel with a Delco 10 SI alternator. I'm not worried about the generator tach drive, I have replaced the engine with one that has the oil pump tach drive, I will be changing the instrument cluster to one with ccw rotation.
    • JWA
    • Thread
    • Replies: 7
    • Forum: Ford
  13. J

    3000 Tach

    I need to replace the instrument cluster on my '66 3000 diesel. I recently replaced the engine with one out of a 3600 which has the oil pump tach drive. Will I need to use a 3600 inst. cluster because the tach rotates counterclockwise as opposed to clockwise on the 3000 cluster which drives off...
    • JWA
    • Thread
    • Replies: 2
    • Forum: Ford
  14. J

    Thought It Was Too Wet

    Been working on my disc, cleaning greasing bearings welded up a few cracks replaced a few zurks. Had attached to the 9N for moving and lifting. When I got through I decided to run it over the gardens even though I figured it was too wet. Actually did well not as wet as I thought, ran the disc...
  15. J

    Farmhand

    Are Farmhand loaders still being manufactured and is so by who? When I google them all I get are auctions and used equipment dealers.
  16. J

    Kubota

    Looking at a Kubota FWD 3830 with FEL, 2005 model with just over 400 hours. It comes with 6' woods finish mower, 5' woods bush hog,6' atlas box blade, 6' king cutter disc, spray rig w/fold down booms hand wand and pto pump, cyclone spreader and boom pole. Barn kept service records and manuals. 8...
    • JWA
    • Thread
    • Replies: 7
    • Forum: Kubota
  17. J

    Hit The Jackpot

    I recently gave a neighbor an old 1986 model Honda 70 four wheeler for his young sons. It is one that I had for my now grown grand daughters, it was now just collecting dust. Yesterday he brought me a Ford 309 two row planter with fertilize hopper, two sets of plates and manual, all in great...
    • JWA
    • Thread
    • Replies: 7
    • Forum: Ford
  18. J

    NH 310

    Does anyone know the horsepower requirement for a NH 310 square baler? Also were they ever produced with their own engine not pto driven.
  19. J

    Destroked 450

    Referencing the 2810 PTO we discussed a few days back. I pulled and shimmed the pressure regulating valve which raised the pressure to 220 PSI. Was 180 PSI at 2100 RPM. Removed and shimmed the Control valve which raised the pressure to 235 PSI. Was 195 PSI at 1300 RPM. So now the pressures are...
    • JWA
    • Thread
    • Replies: 0
    • Forum: Ford
  20. J

    2810 PTO Clutch Assy.

    Have been looking for a PTO clutch assy. E0NNN751AB. This clutch calls for 7 discs per the New Holland parts site, fits 2810 thru 4610 and 335. When I google the part number there are a lot of listings for E0NNN751BA which is a 5 disc clutch for the 5000 and higher series tractors. Anybody know...
    • JWA
    • Thread
    • Replies: 5
    • Forum: Ford
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top