(800) 853-2651
SHOP NOW

Search results

  1. 3LFarms

    F-20 clutch shaft splines worn

    About 2/3 of each spline on the shaft is worn away. The yoke that slides onto the shaft that connects to the transmission is is perfect shape. Before I took it apart, I noticed there was a lot of slop in the coupling area. Can I weld the splines back up, then maybe turn it back down on the...
  2. T

    Front end slab weights

    Recently I purchased 5 slab weights from a tractor parts place in northern Indiana. I got them home and I had them sandblasted and I primed and painted them. I found out quickly they are not Deere made plates. They don't stack against each other well at all and they are different sizes between...
  3. T

    IH plows

    Thank you for the info. The caseIH 7500 plow is basically a little heavier duty IH 735 plow. I think I am leaning towards just getting a fixed 4-16 plow. The guy who has it said his late Brother used it behind a JD 4250 with FWA, well that's another 38 hp more and plus the front axle pulling...
  4. T

    IH plows

    Hi. I have a 1967 John Deere 4020 Diesel. I pulled my larger plow, an IH 720 4-18 behind it in the thick clay soils around central indiana last fall. And it was a lot for that tractor. Some of my friends say I should get a 4-16 plow for it. I am looking at these IH plows: 710,720, and a case IH...
  5. T

    Rantoul Farm Progress Show

    You will do a lot of walking. I'd seriously suggest renting a golf cart or bringing a utv there. Last time I was there, two older guys brung a Kory miniture hay wagon and a Farmall Cub. They let my Brother and his Girlfriends Son and I ride on the hay wagon. It saved us. It was hot and a lot a...
  6. T

    IH plows

    I have a 1967 John Deere 4020 Diesel and a 4230 Diesel. I have an IH 720 4-18 spring trip plow. I noticed a difference in each of their abilities to pull that plow. So I am considering getting a 4-16 plow for the 4020. I am looking at a 710 4-16 plow and an IH 7500 vari width plow. I read just...
  7. T

    1967 John Deere 4020 Diesel

    The front cover on my tractor has an engine oil leak. Is it possible to remove hydraulic coupler, and harmonic balancer pulley without removing the fan shroud and radiator to remove cover and replace gasket? To me it looks like there isn't enough room and the frame has a taper to it and it...
  8. T

    Denso starter on a 4230

    I have a 1967 John Deere 4020 with a denso starter on it. And it works great. I have a 4230 I am going to replace it's starter because it failed. And I am going to install a denso on it. Why does the 4020 have a relay on the denso starter on it? Do I need to install a relay on the denso I will...
  9. T

    4020 diesel pulling an IH 720 4-18 plow

    I have spring trip and they are automatic to rest.
  10. T

    Oliver 565 plow

    K. Thankyou
  11. T

    4020 diesel pulling an IH 720 4-18 plow

    I thought so. I have a 4230 and it handles the 4-18 plow most of the time, but you know it's there without a doubt. And I think it'd be too much for a 4020 in the soil around here. I think I am going to buy that Oliver 565 plow if I can still get decent shares for it. The ones from shoups...
  12. T

    4020 diesel pulling an IH 720 4-18 plow

    I am woundering of around central Indiana if a 4-16 plow id be a better match to a 4020 though.
  13. T

    Oliver 565 plow

    I may be purchasing a 565 4 -16 plow soon. Yrs ago I bought points for a Deere plow from shoups, which I think they get them from Weise mfg. in Iowa. Those points were terrible, they wouldn't pull the plow into the ground, even with suitcase weights hanging on the plow. Are there other places...
  14. T

    4020 diesel pulling an IH 720 4-18 plow

    I have a 1967 4020 with 23hrs on engine since complete overhaul. I am wondering if it'll have enough Heart to pull a 4-18 semi mount plow. I know it depends on the type a soil it is to. I live in central Indiana. I am thinking of getting a Oliver 4-16 plow for it and it'd be a better...
  15. T

    1967 JD 4020 diesl

    Hi Tim S. I tried emailing ya a few times and I havent heard anything back. I was woundering how much to accomplish mod on a 4020 and how much to accomplish on a 4230?
  16. T

    1967 JD 4020 diesl

    K. Thankyou for the info.
  17. T

    1967 JD 4020 diesl

    In what area do you live
  18. T

    1967 JD 4020 diesl

    You want the whole valve body I assume right? How much do want to accomplish conversion and test?
  19. T

    1967 JD 4020 diesl

    I have a wueation regarding the john deere hyd couplers vs the iso couplers. I replaced the seals in my one set and the right side is leaking worse now. And the centet steel ball is leaking to now. I am half tempted to swap them over to iso couplers from Deere with their kit. Ive heard some...
  20. T

    1967 JD 4020 diesl

    K. The front seal in the engine is new and dry as a bone. ( knock on wood )I figure if it were bent that seal would be wet to.
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top