(800) 853-2651
SHOP NOW

Search results

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

  1. M

    MH 30 shined up

    Getting her ready for the River Junction IA Tractor Ride. Jon (Super M), Harvey (Super H) and Me (Massey Harris 30)
  2. M

    Compressor Drain

    Buy a GOOD automatic compressor drain, make sure your regulator has a moisture drain and also any long runs should have a drop pipe with a drain valve. Do not scrimp on the auto drain, the cheap Chinese ones are junk and you will be constantly cleaning them. This is the best, I've been...
  3. M

    Massey Harris 30 Hub snap ring

    Does anyone have a source and part # for the round retaining external snap ring that keeps the wheel hub from slipping off the axle?
  4. M

    Up date wd45

    I have the D17 governor parts on my Grampa's WD45 LP. We also used the tail shaft with the Tachometer output and mounted the tach on top of the battery box. Went from standard 1400 rpm to 2000 rpm. The engine was also balanced so it can handle the higher rpm. You can see it in this video...
  5. M

    great old AC picture

    My Dad has a CA just like that one. Really neat little tractor with hand clutch and live hydraulics. Better than the C, which every time you pushed in the clutch to maneuver around trees, the woods mower would stop. We will be working on the CA and one of my MH30s this summer.
  6. M

    AC parts schematics

    I have 2 MH 30s, so no luck for me on the Agco site :( :(
  7. M

    AC parts schematics

    A local Massey Ferguson dealer shared this link with me. http://www.agcopartsbooks.com/PartsBooksN/login.aspx?region=NorthAmerica Go to the Guest User box under the log in box and click the view books tab. In the search by model box, type in your model such as: wd45 and hit the search...
  8. M

    MH 30 parts schematic

    Looking for a MH 30 parts book that shows the actual part numbers NOT just an exploded view. I need the actual factory part #s.
  9. M

    Very Helpful Guys, But.....

    Sure you can, just go to your profile page and select the always show my email button and notify me on replies buttons. It doesn't show your email, just the button at the bottom of your posts.
  10. M

    Can stainless steel be heated and bent

    You will not hurt SS by heating it up red hot, I do it all the time to bend it into shape. It gets it's properties by a percentage of nickel added to it, once these metals are mixed you can't unmix them. You just can't cut it with an oxy/acet. cutting torch as it will splatter all over and...
  11. M

    Very Helpful Guys, But.....

    Thanks, The email of the guy I needed to contact showed up in classic view. Hopefully I will get a reply.
  12. M

    Very Helpful Guys, But.....

    Tony, Just curious, do you have your reply notifications turned on? I see you have 5910 posts and I can bet you've helped a lot of people out in this forum, yet you don't have your email set up in either view for people to PM you. If you wanted to share shipping info, phone #, etc. with...
  13. M

    Very Helpful Guys, But.....

    I posted here looking for some MH 44 and 30 parts. Several people offered me help and even were willing to send me the parts for free if I pay the shipping!! Problem is, they don't have their email or reply notifications turned on, so there is no way for me to contact them or know that I have...
  14. M

    Massey 30

    Yeah, where and how much. Please don't tease us like this! Include contact info in your reply please.
  15. M

    Parts needed MH 44 & 30

    H2omelon55 Please Email me so I can give you my shipping info. Or call or text me @ six1two4one8five6seven5 Dave
  16. M

    Parts needed MH 44 & 30

    If you guys go to your profile page and enter your email address and then go down to where is says "always show my email address" and select the yes button, then the email button will show up at the bottom of your reply's. Don't worry, it actually doesn't show your email address anywhere and is...
  17. M

    Parts needed MH 44 & 30

    The push rod is 5/16 dia. and 17 3/16 long. So I need (1) push rod, (1) exhaust valve, and (1) rocker arm stand. Click on the email button at the bottom of this message and send me your info and I will get you my UPS # and shipping info. Thanks again so much for the help!! Dave in MN
  18. M

    Parts needed MH 44 & 30

    H2omelon55. I will have dad measure the push rod. Thanks for the help. I was at a 4th of July antique tractor pull an MH 44s took 1st and 2nd. Left the Johnny poppers and Farmall Ms in the dust!!
  19. M

    Parts needed MH 44 & 30

    Wow!! Thanks FBH44, I will definitely check these out. I travel around a lot through the MN country side for my job and am constantly rubbernecking every farm place looking for old tractors. It's mostly JD green and Farmall red I see around here and I'm an AC Orange and MH red guy myself...
  20. M

    Parts needed MH 44 & 30

    Well in the upper Midwest the 44s are a dime a dozen and 30s are pretty rare. Anyway for me the 30 is just such a neat little tractor with its flathead Continental engine. It will be restored for parades and tractor rides, so value and collectability aren't really an issue for me. It will be...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top