-
C
SOS mechanic
I bought mine from an estate sale. So I dont know history. PTO cable was seized and broke. Something strange with other cable. They had the top off transmission when I bought it. Not sure all the problems. Engine runs. I am 18 hours from you. But I got kids in BC. About 4 or 5 hours away from... -
C
SOS mechanic
Hello All I am looking for a SOS mechanic out west. Any in Montana, Dakotas or Minnesota? I am in Saskatchewan and i cant seem to find anyone that has worked on them or wants to work on them. Thanks -
C
ford 3000 SOS
Hello. Do you still have the transmissions? I have a 63 4000 sos. With tranny not working. And I don t have a mechanic in the area that has worked on these. Is the tranny the same as the 3000? Thanks quote="Tequila"](reply to post at 07:51:24 09/05/22) -
C
ford 3000 SOS
I need that T handle, conduit and cable for my 63 sos. Any idea of where I could order from? -
T
Front loader problem
I have a Bush Hog model 2425 QT front end loader with a joy stick control. The joy stick control will raise the loader, lower the loader, and curl the bucket as it should. The problem comes when you dump the bucket. The control will dump the bucket but it is very, very slow and sometimes...- tldnc
- Post #1
- Forum: Tractor & Farm Talk
-
C
Versatile 118
I fixed a 850 Versatile last winter. It was fun. I ended up selling it. Looking for another winter project. A 118 would be interesting. Would be interested in finding one to buy. -
C
Versatile 850
All good comments. Thanks. Yes this tractor ran an air seeder fan in a past life. And yes I need to push the lever ahead or back to start the oil flow in my loop line. I have ordered the service manual on Amazon. I hope it has a hydraulic schematic. I will make everything as per original as I... -
C
Versatile 850
Hello. Any Versatile owners out there. I recently purchased an 850 series 2. It had been sitting outside unused for at least 6 years. It is running fine but I have a couple issues. Hydraulics seem to be deadheading. To prevent overheating I use a loop hose on one of the hydraulic outlets. Also... -
C
Proper way to do a compression test. 4cyl 4000 172
Thanks Bern. But I have to admit I didn?t fully understand what type of tool/tools would be required to do it your way. Is the equipment common? -
C
Proper way to do a compression test. 4cyl 4000 172
Thanks all for getting me back on track. Never fails to amaze me how I can get off track!!! -
C
Proper way to do a compression test. 4cyl 4000 172
Still working on my rebuilt diesel 172. Kinda runs on a couple cylinders. Smoke like crazy. I finally got a good compression tester. I need to know exactly how to do a compression test. I took all injectors out and rocker shaft and push rods. My bracket to hold in the tester adapter wouldn t fit... -
C
4020 power shift. Won t go into 8th
Ok. Thanks guys. I got up enough nerve to take that shift box on the right hand side off for inspection. I had already determined the local wrecker had several to buy. Low and behold a roll pin had worked it s way out over the years on the lower lever. It seemed it could be binding. Replaced...- Carle
- Post #1
- Forum: John Deere
-
C
4020 power shift. Won t go into 8th
Thanks. Because of the cab that is on tractor I had never seen this lever by left heel. I can t move it. It is frozen. I expect it has never been moved. Unsure how hard I should try. Don t want to break something.- Carle
- Post #1
- Forum: John Deere
-
C
4020 power shift. Won t go into 8th
Thanks. Just tried adjusting the linkage. Doesn t appear to be the problem either.- Carle
- Post #1
- Forum: John Deere
-
C
4020 power shift. Won t go into 8th
Hi guys, Just tuning up my 4020. Did compression check and it checked out just fine. New injectors got the engine purring nicely. It is hard to get it to shift into 7th. But lever bottoms in top of slot and it won t shift into 8th. New filters and checked suction screen. Screen was perfectly...- Carle
- Thread
- Replies: 10
- Forum: John Deere
-
C
Front axle 1963 Ford 4000
Haven’t pulled the trigger on my axle yet. Still looking. My free time has been spent trying to get the rebuilt motor running smooth. Starts but very rough and lots of smoke. Has to be a timing issue, but can’t seem to get it right. Have had the diesel pump rebuilt and the injectors reconditioned. -
C
Front axle 1963 Ford 4000
Went to see the lady with the 8N. She didn’t want to sell just the axle (understandable) but needed $1100 to part with the complete tractor. That plus the freight to go get it. I think I shall keep looking. Her grandkids like to play on it. I can relate to her. I have all sorts of stuff I can’t... -
C
Front axle 1963 Ford 4000
I don’t understand all the numbers and letters on Larry’s post. But I was looking on external link site. They showed the same front axle number for 8N, 600, 800, 2000 & 4000. 1947 thru 1964. If that is to be believed shouldn’t that give me some confidence they should all be the same? Maybe... -
C
Front axle 1963 Ford 4000
Ok. Thanks again. So Royse, since it is an 8N the axles are not likely to fit? They look identical. -
C
Front axle 1963 Ford 4000
I am going back to measure things up. I shall look for the serial number to verify the model. I would expect the axles would be a different size but we shall see. Thanks
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy