Search results

  1. M

    4630 no hydraulics after 10 minutes

    With the clutch pressed in, I can get the PTO brake test port to increase to 75 psi. When I let off, it drops back down to 0.
  2. M

    4630 no hydraulics after 10 minutes

    Guy brought me a '76 4630. When it first started up I had all pressure within spec. After about 10 minutes, I lose all hydraulics. Gauge in SCV goes to 0, PTO clutch, brake and clutch go to 0 as well. When I have a gauge in the lube test port I'm seeing 50 psi at 1500 rpm and 80 psi at 2000...
  3. M

    986 injector pop off pressure

    I remembered I had an old injector a mechanic gave me to install the injector cups years ago. I put it in the toolbox in case I needed it again. I was told the injector was no count so I decided to take it apart. It was fairly easy to do. Only thing wrong was the needle was stuck...
  4. M

    986 injector pop off pressure

    Thanks for the response. I don't plan on rebuilding the injectors when a reman can be found for $45. The tractor isn't mine. I suggested injectors to the guy but he responded with "but it was running fine before." I drained out 7 gallons of water and oil.
  5. M

    986 injector pop off pressure

    I'm currently overhauling a 986 that had a cracked sleeve. While the head is at the machine shop, I pop tested the injectors. They all popped off around 2500 psi. The atomization seemed to be less than ideal. I have a manual for the 400 series block and it says 3600 to 3750 for new and...

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top