(800) 853-2651
SHOP NOW

Search results

  1. A

    New Holland no go

    2006 TN60DA Stored in the garage went to use it the other day and it wouldnt move. This tractor does have a shuttle shift I finally figured out that I exercise the clutch with the shuttle shift In forward and reverse position That I could get the tractor Move 2 to 3 inches and then it would...
  2. A

    Ford 3600 diesel

    Well I removed the throttle linkage and cleaned the parts next to the steering column. But something seems to be different now my linkage thats going to the injector pump is rubbing the fuel shut off on the bottom. Is there a possibility that someone could send me or post a Sideview picture of...
  3. A

    WD45 barn fire

    2011 barn fire, pretty much a pile of scrap iron and ashes. Saved some parts off the 45 but not many.. I Have kept the block stored inside spraying the top of pistons with oil and rotating a few revolutions. The head had multiple cracks of course that went to the scrap pile. Here I am 10+...
  4. A

    Ford naa

    Finally got the old tractor out and driving around the property after many hours of going over it. As Ive posted in previous discussions this came to me as a project tractor. Hit the starter 2 evolutions its running great. 38 to 40 pounds of oil pressure, temperature gage coming up , amp meter...
  5. A

    Wisconsin VH4D

    On my stump grinder. Over the last 30 years three rebuilds. Hit the starter, three revolutions starts right up and go out and grind stumps. So the problem Im having is it appears to be running way too rich. Put my finger and wipe on the exhaust pipe a lot of black soot. Yesterday check the...
  6. A

    Ford naa Muffler

    Just short of me looking and researching all the pages did the Ford naa come with a muffler
  7. A

    Ford naa Front rocker oil tube

    Front rocker oil tube is missing after doing some extensive research there may be one or two out there. I do have the tractor running oil is squirting up out of that hole. Has anyone ever made one to fit and or adapt to that hole and the bracket. I can see that whether the oil is just pumping up...
  8. A

    Massey 44

    Happy Easter to all. Well I couldnt take it any longer , tractor has been sitting for 13 hours and pulled the battery out. With my harbor freight meter checked voltage of the battery had 6.4. Then get out my battery hydrometer and checked the cells all in the green. OK put battery back in and...
  9. A

    Massey 44 charging

    Well its time to sell or at least been trying to sell for for about 10 months been putting it out front of the house. 6 V system. Kept a battery tender on it. 100 bucks a pop for a 6 V battery Id like to keep this one charged up. In the last 2 to 3 weeks Ive noticed that after starting it up...
  10. A

    Massey 44

    Has anyone seen any Massey 44 come across the auction block or for sale by owner and any prices thanks
  11. A

    Ford naa manifold

    Somebody tried to do their due diligence in repairing this oh I just love when you take something apart and it comes off in pieces.
  12. A

    Ford naa rocker Shaft oil tubes

    Have what does appears to be 3/16 OD tubing coming up through the center of the head. Then bent around going around and turning down into the rocker shaft port above number four cylinder. Then on the rocker shaft at the end which is about above number one cylinder there is an opening. Now that I...
  13. A

    Ford naa

    Now the manifold has a big hole in it on number four where it bolts up to the side of the head. Somebody try to use what it looks like JB Weld on the exhaust flange. Not good Time for a new manifold just order one online or go to the local tractor scrap yard and try to find one.
  14. A

    Ford naa

    Im not too sure what I did but I had wiring screwed up. Now come out here to the shop and hit the switch fires right up.
  15. A

    Ford naa

    Well starting tomorrow would be week seven. Of no start not even a hint of wanting to fire . But starting tomorrow or right now there is an update tractor is running
  16. A

    Ford naa

    Going wk 6 1/2 still no start maybe got some of the problems figured out. Removed gas tank removed valve cover going to check tappet clearance. WOW figured something out. Doing this cold. Now this thing came to me from a friend and said can you get it running OK Ill try. What I have determined...
  17. A

    Ford naa distributor

    Still trying to get this tractor to hit to my best guess I still think its a timing issue. Set timing mark at 8 degrees on flywheel . Then inserted distributor into hole. With enough finagling everything popped in the place with rotor pointing maybe just a little past number one cylinder. Then...
  18. A

    54 Jubilee

    54 Jubilee Number one and number four cylinder has 120 pounds. Two and three have each got respectively 60 seems kind of odd just a fluke of nature or something else going on internally thanks any input
  19. A

    54 Jubilee Naa timing

    Well going on week four no start. I have brought number one cylinder up to compression stroke were absolute top dead center would be. Using a screwdriver small one to verify where The piston is at absolute top dead center. Now looking at the site window at timing marks on the fly wheel with...
  20. A

    54 Ford jubilee naa

    After 30 years of working on the old tractors I've never thought I'd say I'd give up but I think I've come to the point we're about ready To take the whole thing down to the pond and give it a fish habitat . A friend wanted me to get this thing running and I said OK may be a big mistake. Well...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top